HH Illuminated Pushbutton Switch

Product catalog summary

Specifications:
The HH Illuminated Pushbutton Switch features a compact design with a short body of 11.1mm and PCB terminal with flange. It operates with an electrical rating of AC/DC 30V at 0.05A (resistive). The switch has a contact resistance of less than 50mΩ at DC6V 0.05A and an insulation resistance of more than 100MΩ at 500V DC. It can withstand a dielectric strength of 250V AC RMS between NC and NO terminals and 500V AC RMS between terminals and ground. The mechanical life exceeds 1,000,000 operations, while the electrical life is more than 300,000 operations. The operating temperature ranges from -15℃ to 50℃ with a maximum ambient humidity of 80% RH.

Features:
The switch is space-saving with a depth behind the panel of 11.1mm and offers LED full-face illumination. It has an 8x12 rectangular button size and is available with solder and PCB terminals. The flange attachment enhances panel design and maintenance.

Structure and Dimensions:
The switch is available with or without a flange, with a tolerance of ±0.4mm. The flange can be attached or detached as needed.

Internal Connection Arrangements:
The switch features SPDT contact configuration with specific terminal layouts for soldering and PCB terminals.

LED Data:
The LED ratings vary by color (Red, Green, Yellow) with specific external resistor values for different supply voltages (5V, 12V, 24V). The LED does not incorporate an internal protective resistor.

Panel Layout and Cut Dimensions:
The panel layout varies for independent and serial mounting, with specific dimensions for flange and non-flange types. Panel thickness ranges from 0.5mm to 3.2mm.

Accessories:
Accessories include buttons and filters in various colors, with specific part numbers for each. The flange improves panel design and maintenance.

Assembly & Disassembly:
Instructions are provided for removing the button, fitting the filter, attaching and removing the flange, and ensuring secure assembly.

Ordering Code:
The ordering code specifies options for button color, filter color, flange color, terminal type, LED color, operation type, contact type, and button shape. Note that the color "Yellow" is actually "Orange Yellow."

Catalog excerpts

■FEATURES Compact and space-saving, depth behind panel : 11.1mm LED Full-Face illumination available. Button size : 8x12 rectangular type. Solder terminals and PCB terminals are available for compact body, have flux prevention correspondence. Attaching the flange to the PCB mounting type improves the upgrade of the panel design and maintenance. Flange can also be attached to solder teminal type. Switch Connection SPECIFICATIONS Electrical Rating

Open the catalog to page 1

With a ﬂange type, ﬂange attachment / detachment is possible. Sunmulon Mark ※The ﬁgure shows a solder terminal type. Sunmulon Mark ※The ﬁgure shows a PCB terminal type. Tolera

Open the catalog to page 2

HH INTERNAL CONNECTION ARRANGEMENTS Full-Face •TERMINALS LAYOUT (BOTTOM VIEW) TERMINALS_ •TERMINALS DIMENSIONS (BOTTOM VIEW) Soldering Terminal/Full-Face •TERMINAL SHAPE TERMINAL SHAPE/PCB HOLE CUT-OUT PCB hole cut-out (BOTTOM VIEW) Soldering Terminal PCB Terminal • EXTERNAL RESISTOR Internal LED protective resistor is not incorporated. Refer to the following valued series connection. ^Please turn on the light under the following conditions when pulse lighting. Width PW=100juSsDuty ratio DR=10-1 IFM=100mA with Pulse Please use the following formula when using at other voltages. Power supply...

Open the catalog to page 3

ttunmulon PANEL LAYOUT/PANEL CUT DIMENSIONS•With a flange type Panel thickness : 0.5mm~3.2mm Panel Layout NOTE)Refer to the panel cut dimensions with a flange type.

Open the catalog to page 4

HH ACCESSORIES ●BUTTON Red PART No. ASSEMBLY & DISASSEMBLY 1．Removing Button Set ﬁlter with the sandblast face upwards on to Button, then put Housing on. Hook ﬁngernails in the groove and pull out. Attach the ﬂange to the panel, insert the board attached switch from the panel surface and ﬁx with the stud. Insert a ﬂat screwdriver into the latch between the ﬁxing pin and ﬂange, and pull it out. Insert the ﬂange into the Housing with align the same surface Sunmulon Mark. （Fixing pin） Sunmulon Mark Insert the ﬁxing pin into the hole on the side of the ﬂange, and put it through in to the end of the...

Open the catalog to page 5