*mydirectindustry

Catalogs
SUNMULON
EL LED Indicator

EL LED Indicator

Product catalog summary

Specifications:
The EL LED Indicator is a dual-color, dome-type indicator with screw terminals. It features insulation resistance of more than 100MΩ at 500V DC and dielectric strength of 1500V AC RMS between terminals and ground. The ambient temperature range is -10℃ to 40℃, and ambient humidity is 45% to 85% RH. The supply voltage is DC24 (±10%), with current ratings varying by configuration.

Features:
The indicator is available in a 25mm square flat type and dome type, as well as a 25×55.2mm rectangular type. It has a depth behind the panel of only 42mm and uses screw terminals. Illumination options include full-face, split-face, and dual-color, with LED colors available in red, green, and yellow.

Dimensions:
The product dimensions include a 31mm square and 31×62mm rectangular configuration. The mounting bracket is included, and the panel thickness can range from 1mm to 6mm.

Terminals:
The terminals are configured for full-face, split-face (vertical and horizontal), and dual-color options. Simultaneous lighting is not possible for the dual-color type.

Assembly & Disassembly:
Instructions include removing the cover with a screwdriver, fitting the mounting bracket, and removing the filter with a specific tool. Proper tightening torque for terminal screws is 0.8N・m to 1.2N・m, and for the mounting bracket, it is 0.2N・m or less.

Ordering Code:
The ordering code specifies filter color, supply voltage, cover type, shape and illumination, LED color, and mounting options. The dual-color type requires a milk-white filter, and the LED color combination is red and green only.

Catalog excerpts

■FEATURES Size and Shape: 25mm square flat type and dome type. 25 x55.2mm tectangular type. (External dimensions 31mm Square, 31x62mm Rect.) Depth behind panel : Only 42mm Terminal : Screw Illumination : Full-Face, Split-Face, Dual-Color LED Color : Red, Green, Yellow Note) Simultaneous lighting is impossible for Dual-color type.

Open the catalog to page 1

CARTRIGE BASE Sunmulon Mark Flat type Mounting bracket Sunmulon Mark Dome type Mounting bracket M3.5 ± Screw ◎Mounting bracket 2pcs） attached with the pro

Open the catalog to page 2

Sunmulon Mark Flat type Mounting bracket Top View Sunmulon Mark Dome type Mounting bracket Sunmulon Mark ※ n : Number of A size (Row/Column) m : Number of B size (Row/Column) Mounting bracket Matrix Mounting (without Matrix Frame)

Open the catalog to page 3

EL INTERNAL CONNECTION ARRANGEMENTS Full-Face Split-Face (Vert.) BOTTOM VIEW Sunmulon Mark Sunmulon Mark Split-Face (Horiz.) Sunmulon Mark Sunmulon Mark Sunmulon Mark Full-Face BOTTOM VIEW Sunmulon Mark Split-Face (Vert.) Split-Face (Horiz.) Sunmulon Mark Sunmulon Mark TERMINALS ●TERMINALS LAYOUT Sunmulon Mark Sunmulon Mark Split-Face(Vert.) Anode（＋） Split-Face(Horiz.) Anode（＋） Dual-Color Anode（＋） Cathode（−） Cathode（−） Cathode（−） Cathode（−）R Cathode（−） Cathode（−） Cathode（−）G 1) Terminals for Split-Face, L2 is frame 1, L3 is frame 2 of each ordering code. 2) Dual-Color simultaneous illumination...

Open the catalog to page 4

For crossover wiring of Matrix mounting. LEGEND FACE LEGEND FACE LEGEND FACE sand blast REPLACEMENT PARTS•DIVIDER • Mounting bracket Tolerance: ±0.4mm Joint (Use for Matrix mounting)-]

Open the catalog to page 5

EL ASSEMBLY & DISASSEMBLY 1. Removing Cover Insert a ﬂat head screwdriver in the resess in the center and turn it by 90°. Please be careful not to damage the cover. Put it out straight with the removing tool (SJ-0002-1). 3. Fitting Mounting bracket After inserting the Housing into the panel, attach two of the four places as shown in the ﬁgure and tighten and ﬁx the screw. Mounting holes are on all sides. Mounting hole Attach the mounting bracket to the mounting hole and tighten the screw. The proper tightening torque of the terminal screw is 0.8N・m to 1.2N・m. Tightening torque of the mounting...

Open the catalog to page 6

FuH-Face:Put color no. into the frame 1 Split-Face:Put color no. into the frame 1,2 Dual-Color : Put color no. 78 into the frame 1,2 •HOUSING COLOR •FILTER COLOR •COVER (Dome-type) "Yellow" color for LED, Button, Filter is actually “Orange Yellow". MATRIX INDICATOR EL - xmminn •COLUMN •ROW According to user’s specification, suffix no. will be given. O1 In case of Matrix Indicator, please inquiry us how to order. 7

Open the catalog to page 7

EL LED Indicator

EL LED Indicator

Catalog excerpts

All SUNMULON catalogs and technical brochures