*mydirectindustry

Catalogs
SUNMULON
AL LED Indicator

AL LED Indicator

1 / 4 PagesView full catalog

AL LED Indicator

Product catalog summary

Specifications:

Insulation Resistance: More than 100MΩ at 500V DC
Dielectric Strength: 1500V AC RMS between terminals and ground (50/60Hz for 1 minute)
Reverse Dielectric Strength: 400V
Ambient Temperature: -10℃ to 40℃
Ambient Humidity: 45% to 85% RH

Features:

Size: 30×70mm rectangular type
Depth behind panel: 29.5mm
Terminal: Connector type
Mounting: Snap-in type
Illumination: Mono-Color, Split-Face, Dual-Color, Negative
Current Rating: Red - 12mA, Green - 18mA, Yellow - 18mA
DC Supply Voltage: DC24V (±5%)

Dimensions and Layout:

Panel Layout and Cut Dimensions: Vertical and Horizontal options available
Panel thickness: 1mm to 5mm
Tolerance: ±0.4mm

Internal Connection Arrangements:

Terminal Layout: Connector (BL-0077)
Suitable Wire: AWG#24-28, Diameter 1.0-1.5mm

Replacement Parts:

Filter and Cover options: Full-Face, Split-Face, Negative
Part Numbers for various colors and configurations provided

Ordering Code:

Includes options for terminal, supply voltage, mounting, housing, LED color, cover, illumination type, and filter color

Notes:

Simultaneous lighting possible for Split-Face and Dual-Color
Exclusive connector (BL-0077) recommended
Snap-spring metal plates designed to avoid interference in serial mounting

Catalog excerpts

■ FEARTURES Size : 30x70mm rectangular type. Depth behind panel: 29.5mm Terminal : Connector type Mounting : Snap-in type Illumination: Mono-Color, Split-Face, Dual-Color, Negative

Open the catalog to page 1

INTERNAL CONNECTION ARRAMGEMENTSDual-Color TOP VIEW MULON Mark BOTTOM VIEW Split-Face MULON Mark XX—-X^MrX -XX—-XHWr-X Terminals •TERMINAL LAYOUT TERMINAL>CONNECTOR(BL-0077) Projection •Suitable wire Wire size

Open the catalog to page 2

AL PANEL LAYOUT/PANEL CUT DIMENSIONS Panel Layout Panel cut dimention should be after panel paintings. ACCESSORIES CONNECTOR Wire Harness FILTER DIMENSIONS • Full-Face _039^ 1.5 •Spli-Face REPLACEMENT PARTS • FILTER

Open the catalog to page 3

Bunmulon ORDERING CODE ►ILLUMINATION TYPE Full-Face:Put color no. into the frame 1 Split-Face:Put color no. into the frame 1,2 Dual-Color:Put color no. into the frame 1,2 (Combination 7080, 8090, 9070) Full-Face: Put color no. into the frame 1 Split-Face: Put color no. into the frame 1, 2 Dual-Color: Put 9 into the frame 1 •NOTES 1) In case of Split-Face, LED and Filter color location should be specified as follow: MULON Mark 2) Simultaneous lighting is possible for Split-Face and Dual-Color. 3) Please use exclusive connector (BL-0077). When purchasing a wire harness, connector is unnecessary,...

Open the catalog to page 4

AL LED Indicator

AL LED Indicator

Catalog excerpts

All SUNMULON catalogs and technical brochures