*mydirectindustry

AH

Product catalog summary

Specifications:
The AH Illuminated Pushbutton Switch features a slim design with a characteristic size. It includes silver contacts that are gold-plated and W/E Alloy #1 cross-bar contacts. The electrical rating is AC125V, 250V at 3A for resistive loads, and AC125V, DC30V at 0.1A for resistive loads. Insulation resistance is more than 100MΩ at 500V DC, and dielectric strength is 600V AC RMS between NC and NO terminals, and 1500V AC RMS between terminals and ground. Contact resistance is less than 50mΩ initially at DC6V 1A and 0.1A. The switch has a mechanical life of over 1,000,000 operations and an electrical life of more than 30,000 operations at maximum rated load. It operates in ambient temperatures from -15℃ to +50℃ and humidity up to 80% RH.

Operating Characteristics:
The switch has a momentary action with a maximum operating force of 1.96N and a total travel of 2.5mm. The depth behind the panel is 16 mm. It features a precision-snap action switch movement with a coil spring for long life and tactile feedback. LED illumination is available for full-face and dual-color options, with built-in resistors for 5V, 12V, and 24V. The button size is 7.8×23.1mm, suitable for use as an indicator.

Structure and Dimensions:
The switch includes a filter and button with dimensions of 7.8×23.1mm. The internal connection arrangements allow for dual-color combinations. The LED housing is used with a clear button, and the terminals layout is specified for soldering.

LED Data:
LED ratings include a DC supply voltage of 5V, 12V, and 24V with a maximum operating current of 30mA for full-face and dual-color options. The forward voltage and recommended operating current are specified for different colors. An external resistor is required for dual-color illumination with a 24V type.

Panel Layout and Accessories:
Panel cut dimensions are provided, and the panel thickness ranges from 1mm to 3.2mm. Accessories include various button and filter colors, with a specific removing tool (SJ-0001) for button removal. The ordering code specifies operation, button color, filter color, terminal type, supply voltage, LED circuit, housing, contact, LED color, and button shape.

Notes:
Special notes include the actual color of yellow being orange-yellow, and specific instructions for dual-color and flat indicator buttons.

Catalog excerpts

It's slim and characteristic size. Button size 7.8x23.1mm Achieved reliable touch feeling and uniform illumination ■ Depth behind panel 16 mm ■ Precision-snap action switch movement with coil spring assures long life and outstanding tactile feedback. Silver Contact (Gold-Plated) and W/E Alloy #1 Cross-bar Contact provided. ■LED illumination for Full-Face, Dual-Color. Built-in resistor for 5 V, 12V, 24V For Dual-color, can select the Anode(+) or the Cathode(-) according to the cuircuit. ■ Button size 7.8x23.1mm rectangular type. Easy to use as an indicator, also prepared a flat type with a low button. Switch Connection SPECIFICATIONS Contact

Open the catalog to page 1

FILTER (Used tiwh clear button) DIMENSIONS 12 7.8 Sunmulon mark INTERNAL CONNECTION ARRANGEMENTS ●LED Full-Face TOP VIEW Sunmulon mark TOP VIEW Sunmulon mark Sunmulon mark Sunmulon mark Cathode common Anode common Sunmulon mark Sunmulon mark

Open the catalog to page 2

•TERMINALS DIMENSIONS (BOTTOM VIEW) Sunmulon mark TERMINAL SHAPE SOLDERING TERMINAL(LED:LC,L1,L2) SOLDERING TERMINAL(Switch:NC,NO,COM) LED DATA•LED RATINGS DC Supply Voltage(V) In case of simultaneous illumination for Dual-Color with 24V type, please use non-resistor 24V type and apply external resistor accordingly. Refer to the following formula to calculate external resistance values. Vcc :Supply Voltage Vf :Forward Voltage If :Forward Current • EXTERNAL RESISTOR ITEM Current Reduced Factor (over 25°C working Temperature) :0.36mA/°C(DC)

Open the catalog to page 3

Sunmulon PANEL LAYOUT / PANEL CUT DIMENTIONS •7.8X23.1mm Rectangular Panel Layout Panel cut dimension should be after panel paintings. REMOVING TOOL The button can be easily removed and replaced. ASSEMBLY & DISASSEMBLY I.Remiving Button Be sure to remove with the removing tool (SJ-0001). Hang the button with the removing tool in the groove, and put it out straight. 2.Fitting Filter Put the filter in the button with the horizontal level down.

Open the catalog to page 4

AH ORDERING CODE LED Illumination ★Generally, in case of using color button, filters are not necessary. ♦ Please be noted that the color of “Yellow" for LED, Button, Filter is actually “Orange Yellow" •NOTES ^1)in case of Dual-Color, button should be C(Clear) with Milk White filter or Milk White button. ^2)in case of simultaneous illumination for Dual-Color with 24V type, please use non-resistor 24V type and apply external resistor accordingly. ^3)Flat Indicator button level is Flat.(locked position) Removing tool for Flat Indicator SJ-0009 ^To remove the button for the flat indicator, it can...

Open the catalog to page 5

AH

AH

Catalog excerpts

All SUNMULON catalogs and technical brochures