SK300 High Shear Mixer High shear dispersing and emulsifying is often required when efficiently, rapidly and uniformly distribute one or Standard Motor . . , ... several phases into another continuous phase, while normally these phases are immiscible. Work Principle The high tangential velocity produced by high speed rotor, and the strong kinetic energy produced by high frequency mechanical effect, can make materials subjected to intense mechanical and hydraulic shear, centrifugal squeezing, liquid layer friction, tearing, impacting, turbulence and other synthetic actions in narrow clearance between stator and rotor. Consequently, combined with mature processes and suitable additives, immiscible solid, liquid and gas phases can be dispersed and emulsified instantly. High frequency circulations will finally result in high quality and constant Rotor / Stator Vacuum Powder Feeding from Bottom Dispersion Disc SUNKAIER offers complete procedural solutions in the paint and coating process industry. Coating technology is successfully used in the following areas of expertise: Coating Colour blending Working Stations Dispersing Machines Combined Dispersing System Body Unit Dispersing Aggregate Starch Processing Pigment Processing Metering Technology Filter Systems Fibre Extraction System Process Control Systems Dispersion Station The new SUNKAIER powder dissolving station takes a revolutionary approach to powder/liquid mixing using vacuum to pull in powders and wetting in liquid and no dust emission. High shear disperser employs dry running seals. Compressed Air High Shear Dispersion