SLPD 40/20-64/32 SAE is a series of in-line double pumps with extremely low noise levels for demanding mobile hydraulics. Other advantages: SLPD 40/20-64/32 SAE pumps are equipped with shafts and flanges according to the SAE-C standard. They are available in five different sizes. It´s slim pump housing enables direct installation on the power take-off in very confined spaces. SLPD is also easy to install with frame mountings via an intermediate shaft. The high level of reliability is based on the choice of materials, hardening methods, surface structures and the quality assured manufacturing process. • A cost effective total solution in relation to a conventional installation using two pumps with a splitter gear box • Independent direction of rotation • Smooth operation over the entire speed range • Long life due to high demands on material selection, such as bearings, seals, etc. • O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power take-off GB - Printed: 04/02/2014 06:03:47 - Page 1/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

VERSIONS, MAIN DATA Example SL Sunfab In-Line Dual flow pump Sunfab standard SLPD Sunfab standard GB - Printed: 04/02/2014 06:03:47 - Page 2/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

Pump SLPD 40/20-64/32 SAE Theoretical oil flow at pump speed Displacement Max pump speed Max working pressure Weight Dimensions Min. dimensions Tare-weight torque (M) Direction of rotation GB - Printed: 04/02/2014 06:03:47 - Page 3/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

WARNING When the pump is running: 1. Do not touch the pressure hose 2. Watch out for rotating parts 3. The pump and hoses may be hot Sunfab reserves the right to make changes in design and dimensions without notice. Printing and typesetting errors reserved. GB - Printed: 04/02/2014 06:03:47 - Page 4/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com