Catalog excerpts
SLPD 20/20-64/32 DIN is a series of in-line dual flow pumps with extremely low noise levels for demanding mobile hydraulics. Other advantages: SLPD 20/20-64/32 DIN comes in eight different sizes, where three models feature differentiated flows. Pumps with differentiated flow increase the field of application as they can provide three different flows: one small, one large and one combined flow. Maximum pressure is 330-350 bar depending on the model. Its slim pump housing makes direct mounting on the power take -off possible in very confined areas. SLPD 20/20-64/32 DIN is also ideal for installation using a frame bracket via an intermediate shaft. • A cost effective total solution in relation to a conventional installation using two pumps with a splitter gear box • Independent direction of rotation • Smooth operation over the entire speed range • Long life due to high demands on material selection, such as bearings, seals, etc. • O-rings on all contact surfaces as well as double shaft seals It is available in a version with a Savtec valve for applications where the hydraulics need to be used while the vehicle is on the move. GB - Printed: 04/02/2014 06:03:07 - Page 1/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: sunfab@sunfab.se Web: www.sunfab.com
Open the catalog to page 1VERSIONS, MAIN DATA Example SL Line Sunfab In-Line Dual flow pump 7. Connection cover S4 Sunfab standard SLPD Sunfab standard X = Standard, preferred (X) = Available, option O = Available on request, contact Sunfab GB - Printed: 04/02/2014 06:03:07 - Page 2/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: sunfab@sunfab.se Web: www.sunfab.com
Open the catalog to page 2Pump SLPD 20/20-64/32 DIN Theoretical oil flow at pump speed Displacement Max pump speed Max working pressure Weight Dimensions Min. dimensions Tare-weight torque (M) Direction of rotation GB - Printed: 04/02/2014 06:03:07 - Page 3/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: sunfab@sunfab.se Web: www.sunfab.com
Open the catalog to page 3WARNING When the pump is running: 1. Do not touch the pressure hose 2. Watch out for rotating parts 3. The pump and hoses may be hot Sunfab reserves the right to make changes in design and dimensions without notice. Printing and typesetting errors reserved. GB - Printed: 04/02/2014 06:03:07 - Page 4/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: sunfab@sunfab.se Web: www.sunfab.com
Open the catalog to page 4All Sunfab Hydraulics catalogs and technical brochures
-
ANTI-CAVITATION VALVE
2 Pages
-
ANTI-CAVITATION VALVE
2 Pages
-
Flushing Valve
2 Pages
-
Speed Sensor
4 Pages
-
DIODE GATE
2 Pages
-
INJECTOR
2 Pages
-
SAM 010-130 DIN
7 Pages
-
SVH 130
20 Pages
-
SCM 012-130 DIN
7 Pages
-
SCM 010-130 SAE
12 Pages
-
SCM 010-130 ISO
12 Pages
-
SAP 084, 108 DIN Optimised
4 Pages
-
SAPT 090, 130 DIN
4 Pages
-
SAP 012-108 DIN
4 Pages
-
SCPD 76/76 DIN
4 Pages
-
SLPD 40/20-64/32 SAE
4 Pages
-
SLPD 20/20-64/32 DIN SAVTEC
5 Pages
-
SCPD 56/26 DIN By-Pass
4 Pages
-
SCPD 56/26 DIN
4 Pages
-
SCM 025-108 M2
8 Pages
-
SCM 012-130 SAE
12 Pages
-
SCPT 090, 130 DIN
4 Pages
-
SCP 012-130 ISO
7 Pages
-
SCP 084, 108 DIN Optimised
4 Pages
-
SAP 040-064 DIN
4 Pages
-
SCP 012-108 DIN
4 Pages
-
Product Catalogue
25 Pages
-
Accessories Catalog
28 Pages
-
axial piston hydraulic motor SAE
11 Pages
-
Anti-Cavitation Valve
2 Pages
-
Splitter gearbox SZ 121
2 Pages
-
SVH 062, 092, 112
16 Pages
-
SC 5012-5108 SAE
2 Pages
-
SC 012-108 DIN
2 Pages
-
suction oil filter
2 Pages
-
hydraulic relief valve
2 Pages
-
oil tank
2 Pages
-
power take-off for engine
2 Pages
-
dual shaft gearbox
2 Pages
-
variable flow hydraulic pump
16 Pages
-
hydraulic truck pump
2 Pages
-
SCM 047-090 M2
6 Pages
Archived catalogs
-
axial piston hydraulic motor
10 Pages