1. Catalogs
  2. Sunfab Hydraulics
  3. SCPT 090, 130 DIN
video corpo

SCPT 090, 130 DIN
1 /4Pages

SCPT 090, 130 DIN

SCPT 090, 130 DIN
1 /4Pages

Catalog excerpts

SCPT 090, 130 DIN-1

SCPT 090, 130 DIN is an addition to the SCP series that supports larger flows and pressure up to 300 bar. SCPT 090, 130 DIN are ideal for applications that require both a high flow and a high working pressure in combination with demands on small installation measurements. The pumps are either mounted directly on the power take-off or on a frame bracket via an intermediate shaft. Other advantages: • High maximum speed while maintaining low noise levels • Smooth operation over the entire speed range • Long life due to high demands on material selection, such as bearings, seals, etc. • O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power take-off • The stop shoulder on the angular housing allows the pump´s direction of rotation to be changed without the risk of altering the gear meshing GB - Printed: 04/02/2014 05:54:09 - Page 1/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

 Open the catalog to page 1
SCPT 090, 130 DIN-2

VERSIONS, MAIN DATA Example SC Sunfab Compact Tipper pump Sunfab standard GB - Printed: 04/02/2014 05:54:09 - Page 2/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

 Open the catalog to page 2
SCPT 090, 130 DIN-3

Pump SCPT 090, 130 DIN Nominal oil flow at pump speed Displacement Max pump speed continuous limited Max working pressure Weight Dimensions Tare-weight torque (M) Direction of rotation GB - Printed: 04/02/2014 05:54:09 - Page 3/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

 Open the catalog to page 3
SCPT 090, 130 DIN-4

WARNING When the pump is running: 1. Do not touch the pressure hose 2. Watch out for rotating parts 3. The pump and hoses may be hot Sunfab reserves the right to make changes in design and dimensions without notice. Printing and typesetting errors reserved. GB - Printed: 04/02/2014 05:54:09 - Page 4/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.