Catalogs >
Sunfab Hydraulics >
SCP 084, 108 DIN Optimised for injector

SCP 084, 108 DIN Optimised for injector
1 / 4Pages

Catalog excerpts

SCP 084, 108 DIN Optimised for injector - 1

SCP DIN Optimised for Injector is an externally drained variant of the SCP series, which offers a very high oil flow in combination with the Sunfab injector K-Jet 2. Other advantages: SCP 084, 108 DIN Optimised for Injector is suitable for hydraulic motor operations in closed hydraulic systems with injector K-Jet 2 for pressurisation of the suction side. This gives excellent speed characteristics and high flows. • Smooth operation over the entire speed range The pump´s front shaft seals are manufactured from fluor rubber to withstand the higher temperatures involved with engine mounting. It is a speed-optimised pump and therefore supplied for either left (L) or right (R) rotation direction. • High maximum speed while maintaining low noise levels • Long life due to high demands on material selection, such as bearings, seals, etc. • O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power take-off GB - Printed: 04/02/2014 05:52:24 - Page 1/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: sunfab@sunfab.se Web: www.sunfab.com

Open the catalog to page 1

SCP 084, 108 DIN Optimised for injector - 2

VERSIONS, MAIN DATA Example SC Line Sunfab Compact Sunfab standard See separate brochure "Injector" for more information. 4. Sealing V GB - Printed: 04/02/2014 05:52:24 - Page 2/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: sunfab@sunfab.se Web: www.sunfab.com

Open the catalog to page 2

SCP 084, 108 DIN Optimised for injector - 3

Pump SCP 084, 108 DIN Optimised for injector K-Jet 2 Oil flow at 97% vol. efficiency and 20 MPa Displacement Max pump speed min continuous max continuous max limited Max working pressure Weight Tare-weight torque (M) Direction of rotation GB - Printed: 04/02/2014 05:52:24 - Page 3/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: sunfab@sunfab.se Web: www.sunfab.com

Open the catalog to page 3

SCP 084, 108 DIN Optimised for injector - 4

WARNING When the pump is running: 1. Do not touch the pressure hose 2. Watch out for rotating parts 3. The pump and hoses may be hot Sunfab reserves the right to make changes in design and dimensions without notice. Printing and typesetting errors reserved. GB - Printed: 04/02/2014 05:52:24 - Page 4/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: sunfab@sunfab.se Web: www.sunfab.com

Open the catalog to page 4