SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design gives a compact motor with few moving parts, high starting torque and high operational reliability. It covers the entire displacement range 12-130 cmᶟ/rev. with max. pressure 400 bar. • High efficiency • Smooth operation over the entire speed range • Suitable for applications with high angular accelerations due to its high rotary stiffness It´s high level of reliability is due to the choice of materials, hardening methods, surface structures and the quality assured manufacturing process. Motor SCM 012-130 DIN Displacement Working pressure max intermittent max continuous Revolutions max intermittent max continuous min continuous Power max intermittent max continuous Starting torque theoretical value Moment of inertia (x 10-3) Max intermittent housing pressure Weight Intermittent operation refers to a max of 6 seconds per minute, representing e.g. peaks in rotational speed during unloading and acceleration. 3201GB1502 1.1 - Printed: 16/09/2016 12:29:50 - Page 1/7 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunf

Versions, main data Example SC Line Sunfab Compact, bent-axis design 40° Mount flange horizontal * 90° Mount flange vertical * 90° Mount flange horizontal * 40° Mount flange vertical * Side connections, flanged * Combicover 90° side conn. thread . * According to SAE J518 code 62 ø 80 8. Connections X = Standard, preferred (X) = Available, option O = Contact Sunfab * Only threaded connections ** Only flanged connections *** Only available for S covers External drainage No speed sensor Prepared for speed sensor Fitted speed sensor type PNP* Fitted speed sensor type NPN* * See separate brochure...

3201GB1502 1.1 - Printed: 16/09/2016 12:29:50 - Page 3/7 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

3201GB1502 1.1 - Printed: 16/09/2016 12:29:50 - Page 4/7 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

3201GB1502 1.1 - Printed: 16/09/2016 12:29:50 - Page 5/7 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

General instructions Shaft loads Optimal angle of attack for radial loads Pressure anti-clockwise A rotation Pressure clockwise rotation B External loading of the shaft, its size, direction and location also affect the service life of the bearings. Bearing service life (h) The service life of the motor largely depends on the service life of the bearings. These are affected by the operating conditions such as speed, pressure, oil viscosity and degree of purification. If a calculation of bearing service life is required for special applications, contact Sunfab Hydraulics. The motor housing is filled...

1. Do not touch the pressure pipe 2. Beware of rotating parts 3. The motor and pipes can reach high temperatures Sunfab reserves the right to make changes in design and dimensions without notice. Printing and typesetting errors reserved. © Copyright 2015 Sunfab Hydraulics AB. All Rights Reserved. ^SJUMJEM GB - Printed: 16/09/2016 12:29:50 - Page 7/7 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com