Catalog excerpts
SAP DIN Optimised for Injector is an externally drained variant of the SAP series, which offers a very high oil flow in combination with the Sunfab injector K-Jet 2. SAP 084, 108 DIN Optimised for Injector is suitable for hydraulic motor operations in closed hydraulic systems with injector K-Jet 2 for pressurisation of the suction side. This gives excellent speed characteristics and high flows. The front seals in the pump are made of HNBR to withstand the higher temperatures that occur at engine PTO mounting. It is a speed-optimised pump and therefore supplied for either left (L) or right (R) rotation direction. Other advantages: • Light weight metal casing design • Smooth operation over the entire speed range • Long life due to high demands on material selection, such as bearings, seals, etc • Corrosion free light metal-housing • Less heat generation due to better ability to dissipate heat through housing 3117GB1503 1.0 - Printed: 14/07/2015 12:16:22 - Page 1/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: sunfab@sunfab.se Web: www.sunfab.com
Open the catalog to page 1Versions, main data Example SA Line Sunfab Aluminium Sunfab standard Right Left 10. Accessories 00 HNBR See separate brochure "Injector" for more information. 3117GB1503 1.0 - Printed: 14/07/2015 12:16:22 - Page 2/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: sunfab@sunfab.se Web: www.sunfab.com
Open the catalog to page 2Pump SAP 084, 108 DIN Optimised for injector K-Jet 2 Oil flow at 97% vol. efficiency and 20 MPa Displacement Max pump speed min continuous max continuous max limited Max working pressure Weight Dimensions Tare-weight torque (M) Direction of rotation 3117GB1503 1.0 - Printed: 14/07/2015 12:16:22 - Page 3/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: sunfab@sunfab.se Web: www.sunfab.com
Open the catalog to page 3WARNING When the pump is running: 1. Do not touch the pressure hose 2. Watch out for rotating parts 3. The pump and hoses may be hot Sunfab reserves the right to make changes in design and dimensions without notice. Printing and typesetting errors reserved. GB - Printed: 14/07/2015 12:16:22 - Page 4/4 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: sunfab@sunfab.se Web: www.sunfab.com
Open the catalog to page 4All Sunfab Hydraulics catalogs and technical brochures
-
ANTI-CAVITATION VALVE
2 Pages
-
ANTI-CAVITATION VALVE
2 Pages
-
Flushing Valve
2 Pages
-
Speed Sensor
4 Pages
-
DIODE GATE
2 Pages
-
INJECTOR
2 Pages
-
SAM 010-130 DIN
7 Pages
-
SVH 130
20 Pages
-
SCM 012-130 DIN
7 Pages
-
SCM 010-130 SAE
12 Pages
-
SCM 010-130 ISO
12 Pages
-
SAP 084, 108 DIN Optimised
4 Pages
-
SAPT 090, 130 DIN
4 Pages
-
SAP 012-108 DIN
4 Pages
-
SCPD 76/76 DIN
4 Pages
-
SLPD 40/20-64/32 SAE
4 Pages
-
SLPD 20/20-64/32 DIN SAVTEC
5 Pages
-
SLPD 20/20-64/32 DIN
4 Pages
-
SCPD 56/26 DIN By-Pass
4 Pages
-
SCPD 56/26 DIN
4 Pages
-
SCM 025-108 M2
8 Pages
-
SCM 012-130 SAE
12 Pages
-
SCPT 090, 130 DIN
4 Pages
-
SCP 012-130 ISO
7 Pages
-
SCP 084, 108 DIN Optimised
4 Pages
-
SAP 040-064 DIN
4 Pages
-
SCP 012-108 DIN
4 Pages
-
Product Catalogue
25 Pages
-
Accessories Catalog
28 Pages
-
axial piston hydraulic motor SAE
11 Pages
-
Anti-Cavitation Valve
2 Pages
-
Splitter gearbox SZ 121
2 Pages
-
SVH 062, 092, 112
16 Pages
-
SC 5012-5108 SAE
2 Pages
-
SC 012-108 DIN
2 Pages
-
suction oil filter
2 Pages
-
hydraulic relief valve
2 Pages
-
oil tank
2 Pages
-
power take-off for engine
2 Pages
-
dual shaft gearbox
2 Pages
-
variable flow hydraulic pump
16 Pages
-
hydraulic truck pump
2 Pages
-
SCM 047-090 M2
6 Pages
Archived catalogs
-
axial piston hydraulic motor
10 Pages