THE SOURCE OF HYDRAULIC POWER SAM 010-130 DIN SAM 010-130 DIN is a series of light weight casing axial piston motors, particularly suitable for mobile hydraulics. SAM 010-130 DIN is of the bent-axis type with spherical pistons. The design gives a compact motor with few moving parts, high starting torque and high operational reliability. It covers the entire displacement range 10-130 cm3/rev. with max. pressure 400 bar. It's high level of reliability is due to the choice of materials, hardening methods, surface structures and the quality assured manufacturing process. Other advantages: • Light weight metal casing design • Smooth operation over the entire speed range • High efficiency • Suitable for applications with high angular accelerations due to its high rotary stiffness • Corrosion free light metal-housing • Less heat generation due to better ability to dissipate heat through housing Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

Versions, main data Example_ _ _ X = Standard, preferred O = Contact Sunfab Displacement Working pressure max intermittent max continuous Revolutions max intermittent max continuous min continuous Power max intermittent max continuous Starting torque theoretical value Moment of inertia (x 10-3) Max intermittent housing pressure Weight Intermittent operation refers to a max of 6 seconds per minute, representing e.g. peaks in rotational speed during unloading and acceleration. Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected]...

General instructions Shaft loads The service life of the motor largely depends on the service life of the bearings. These are affected by the operating conditions such as speed, pressure, oil viscosity and degree of purification. Optimal angle of attack for radial loads Pressure clockwise rotation b External loading of the shaft, its size, direction and If a calculation of bearing service life is required for location also affect the service life of the bearings. special applications, contact Sunfab Hydraulics. Installation The motor housing is filled with oil to at least 50% of the volume before...

Dimensions SAM 010-034 Flange, shaft & connection cover Millimeter (inch) 3205GB1706 1.0 - Printed: 22/01/2020 09:23:28 - Page 4/7 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

Dimensions SAM 040-064 Flange, shaft & connection cover Millimeter (inch) 3205GB1706 1.0 - Printed: 22/01/2020 09:23:28 - Page 5/7 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

Dimensions SAM 084-130 Flange, shaft & connection cover Millimeter (inch) 3205GB1706 1.0 - Printed: 22/01/2020 09:23:28 - Page 6/7 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

WARNING When the motor is in use: 1. Do not touch the pressure pipe 2. Beware of rotating parts 3. The motor and pipes can reach high temperatures Sunfab reserves the right to make changes in design and dimensions without notice. Printing and typesetting errors reserved. © Copyright 2015 Sunfab Hydraulics AB. All Rights Reserved. GB - Printed: 22/01/2020 09:23:28 - Page 7/7 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com