3301 GB Power take off Sunfab’s power take off is the link between the vehicle and the pump. It can be mounted on the gearbox or the engine. A wide range of power take offs are available from Sunfab with different ratios and torques to fit most gearboxes. Together with Sunfab’s extensive range of pumps these form unbeatable combinations both technically and economically and offer immense choice. Sunfab’s power take offs are designed for direct mounting of all Sunfab pumps. The power take off is supplemented with an adapter for intermediate shaft installation. Power take-off selection also at www.sunfab.se Sunfab’s most popular power take off is presented in detail on the data sheet with technical specifications and dimensions. The pump selection program includes all of our power take offs and the suitability of the selected addition. Technical data for all power take-offs in our range and from our pump selection program can be found at Sunfab’s website. Can be found under Products – Power take-off - Pump selection program.

Assembly position X, Y, Z denote the position of the power take off on the gearbox. Adapter for intermediate shaft installation: See Sunfab’s accessory catalogue. Type of PTO State whether the power take off is straight or side offset/ geared. E.g.: 1 = Straight 2 = Side offset/geared With ratio means the combined ratios between the engine and pump. The stated torque is the maximum intermittent turning torque. Direction of rotation The power take off’s direction of rotation is stated when you look at its mounting flange. The power take off in the example is shown with right-hand direction of...