Catalog excerpts
THE SOURCE OF HYDRAULIC POWER INJECTOR Injector Sunfab Injector K-JET 2 is a basic technical solution for the recirculation of oil in closed hydraulic systems that is cost efficient and saves weight. Three models K-JET 2, cover the flows 160, 250 and 350 l/min. K-JET 2 recirculates the oil with an injector. This function replaces the previous standard of feed pressure pumps as compensation for leakage oil losses in the main circuit and any scavenging pumps for the cooling and filtering circuits. K-JET 2 also slightly pressurises the feed pressure, which means a significantly higher pump speed than the self-priming speed can be used. This is reflected in a considerable increase in the capacity of the pump. Hydraulic systems with pressure feed of the pump require the pump to be externally drained. Sunfab pump SCI conforms to these demands and is recommended in applications with K-JET 2. K-JET 2 has no moving parts, which makes it completely maintenance free. Advantages of K-JET 2 compared with open hydraulic circuits: • Reduced tank size and oil volume. Only 15-20 % of the main pump flow • Lower weight through smaller oil tanks • Lower cost for oil • Significantly higher pump speed ^SUNFAB Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: sunfab@sunfab.se Web: www.sunfab.com
Open the catalog to page 1Function Sunfab ������ � houses an Function injector�. When the r�etur�n Sunfab K-JET 2 houses an injector. When the return flow is led in port R and meets the injector, approxiflow is led in por�t R and mately 10 % of the flow is deflected via port A. The meets the injector�, ap� flow and leakage flow from the pump and hydraulic motor are led to the oil tank. pr�oximately 10 % of the flow is deflected via por�t New oil is drawn in from the tank via port N and is A. ��he flow and leakage added with the injector’s other through flow. Suitable flow fr�om the pump and counterbalancing with the...
Open the catalog to page 2All Sunfab Hydraulics catalogs and technical brochures
-
ANTI-CAVITATION VALVE
2 Pages
-
ANTI-CAVITATION VALVE
2 Pages
-
Flushing Valve
2 Pages
-
Speed Sensor
4 Pages
-
DIODE GATE
2 Pages
-
SAM 010-130 DIN
7 Pages
-
SVH 130
20 Pages
-
SCM 012-130 DIN
7 Pages
-
SCM 010-130 SAE
12 Pages
-
SCM 010-130 ISO
12 Pages
-
SAP 084, 108 DIN Optimised
4 Pages
-
SAPT 090, 130 DIN
4 Pages
-
SAP 012-108 DIN
4 Pages
-
SCPD 76/76 DIN
4 Pages
-
SLPD 40/20-64/32 SAE
4 Pages
-
SLPD 20/20-64/32 DIN SAVTEC
5 Pages
-
SLPD 20/20-64/32 DIN
4 Pages
-
SCPD 56/26 DIN By-Pass
4 Pages
-
SCPD 56/26 DIN
4 Pages
-
SCM 025-108 M2
8 Pages
-
SCM 012-130 SAE
12 Pages
-
SCPT 090, 130 DIN
4 Pages
-
SCP 012-130 ISO
7 Pages
-
SCP 084, 108 DIN Optimised
4 Pages
-
SAP 040-064 DIN
4 Pages
-
SCP 012-108 DIN
4 Pages
-
Product Catalogue
25 Pages
-
Accessories Catalog
28 Pages
-
axial piston hydraulic motor SAE
11 Pages
-
Anti-Cavitation Valve
2 Pages
-
Splitter gearbox SZ 121
2 Pages
-
SVH 062, 092, 112
16 Pages
-
SC 5012-5108 SAE
2 Pages
-
SC 012-108 DIN
2 Pages
-
suction oil filter
2 Pages
-
hydraulic relief valve
2 Pages
-
oil tank
2 Pages
-
power take-off for engine
2 Pages
-
dual shaft gearbox
2 Pages
-
variable flow hydraulic pump
16 Pages
-
hydraulic truck pump
2 Pages
-
SCM 047-090 M2
6 Pages
Archived catalogs
-
axial piston hydraulic motor
10 Pages