Flushing valve for SUNFAB hydraulic motor SCM SUNFAB’s flushing valve ensures that the oil temperature inside the motor housing remains at the recommended level. Excessively high temperatures reduce the service-life of the shaft seal and the viscosity of the oil deteriorates. Function: A small proportion of the motor’s return oil flow is flushed through the motor housing and reduces the housing temperature. Flushing flow l/min 6-8 8-10 10-12 *Only suits SUNFAB motors with V2 back covers whose bolt pattern matches that of the valve. Subject to design alteration Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

FLUSHING VALVE Dimensions flushing valve Dimensions flushing valve Valve for SCM 025-034 Dimensions flushingEvalve Flushing Flow Flushing Flow Return Line Pressure 2 6 The drainage pipe should 1094, SE-824 to Hudiksvall, drainage Initial opening pressure 5,7 bar. Valve E-mail: [email protected] Sunfab Hydraulics AB, Box be connected 12 uppermost Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, fully switched at 9,3 bar. Web: www.sunfab.com outlet. For requests of other flushing flows, please contact Sunfab Hydraulics 3415GB1210 Produced in Sweden by Nova Design Return Line 5,7 bar. The drainage...