THE SOURCE OF HYDRAULIC POWER DIODE GATE Sunfab Diod Gate is an assembly set for simultaneous electrical control of directional valves and activation of the pump flow via a By-Pass or Savtec valve. Sunfab Diode Gate is primarily intended for electrical installations on combination vehicles with engine mounted PTO and a single or dual flows pump with By-Pass alternatively a SLPD pump with electrical Savtec. Sunfab Diode Gate can connect 5 double acting or 10 single acting hydraulic functions to the By-Pass or electrical Savtec. Technical data: Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

DIODE GATE Circuit diagram for Sunfab Diode Gate: The magnets 01-06 belong to the control valve and is activated when any of the switches are actuated. At the same time the diode gate deflects current to the By-Pass valve’s coil 07 alternative Savtec if it is this located on the pump. The diode acts as a “check valve” so the current can only flow in the direction of the arrow. Sunfab Diod Gate can control 10 functions. Should additional functions be required, supplement the system with more diode gates. The Diod Gates have a very high enclosure class against both water and dust (IP 68). More...