Catalogs >
Sunfab Hydraulics >
Anti-Cavitation Valve_2012

Anti-Cavitation Valve_2012
2Pages

Catalog excerpts

3416 GB Anti cavitation valve Anti cavitation valve for Sunfab hydraulic motor SCM Sunfab’s anti cavitation valve is used to minimise the risk of cavitation damage in connection with insufficient inlet pressure. This can occur, among others, in applications with a relatively large rotating mass with a long run down time (e.g. fan operations). The hydraulic motor must have a defined direction of rotation when using Sunfab’s anti cavitation valve. The valve can be adapted to both left and right rotation. Function: A check valve between the pressure and return ports opens to ensure a flow of oil to the motor if the inlet pressure to the motor becomes too low. It is therefore important to have a specific back pressure on the return line, which if necessary can be created by means of a back-pressure valve. For motor SCM Max. continuous pressure MPa Max. intermittent pressure MPa Weight kg Subject to design alteration 1 (2) 012-034 040–064 084–130 35 40 1.7 35 40 3.9 35 40 3.4

Open the catalog to page 1

Dimensions anti cavitation valve Valve for SCM 012-034 Part No. 91024 G ¾´´ Valve for SCM 040–064 Part No. 91025 33 64 90 94.5 65 23.8 43 G ¾´´ 53 64 100 139 48 50.8 75 Suits with K3 Suits with V2 142 184 Valve for SCM 084–130 Part No. 91026 012-034 Type SCM 040-064 48 084-130 91026 50854 50855 Min-max flange height [mm] - 16-21 21-25 Flange kit part. no. - 50857 50858 Flange thread dim. - G 3/4” G 1” 57.2 91025 - 80 91024 Bolt kit part. no. Valve part. no. 27.8 75 Suits with V1 140 161 ∆p (bar) 10 8 6 91024 91025 91026 2 0 50 100 150 200 250 300 350 400 Q (l/min) Valve opening pressure 0,3...

Open the catalog to page 2