THE SOURCE OF HYDRAULIC POWER ANTI-CAVITATION VALVE Anti-cavitation valve for Sunfab’s hydraulic motor SCM Sunfab's anti-cavitation valve is used to minimise the risk of cavitation damage in connection with insufficient inlet pressure. This can occur, for example, in applications with a relatively large rotating mass with a long run-down time (e.g. fan operations). The hydraulic motor must have a defined direction of rotation when using Sunfab's anti-cavitation valve. The valve can be adapted to both left and right rotation. Function: A check valve between the pressure and return ports opens to ensure a flow of oil to the motor if the inlet pressure to the motor becomes too low. It is therefore important to have a specific back pressure on the return line, which if necessary can be created by means of a back-pressure valve. Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com

ANTI-CAVITATION VALVE Dimensions anti-cavitation valve Valve for SCM 010-034 Part No. 91024 G ¾´´ Valve for SCM 084–130 Part No. 91026 Type SCM Min-max flange height [mm] Valve opening pressure 0,3 bar Sunfab reserves the right to make changes in design and dimensions without notice. Printing and typesetting errors reserved. © Copyright 2015 Sunfab Hydraulics AB. All Rights Reserved. 3306GB1512 REV 1.3 - Page 2/2 Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: