sunbrush\ cleaning systems rapidFor particularly large solar tables In combination with an excavator, the rapid works wonders and cleans solar tables up to 10 metres deep.

The length of the brush arm is 4.5 m, 5 m or 5.5 m. Example cleaning mode for 8 m modular tables: Cleaning path 1 The upper area of the module table is cleaned first during forward operation. The lower area of the module table is then cleaned in the return flow. Standard brush, for the majority of systems. Developed for NexTracker systems. The longer bristles can be guided directly over the bearing assemblies. Certified brush Scan this QR code for the official study by Ulm University of Applied Sciences on wet and dry cleaning. Brush length Different brush lengths are available depending on the...

WashTronic System Automatic levelling adjustment on uneven terrain. The contact pressure between the brush and the module surface is set once and remains constant throughout the entire cleaning process. Damage to the module is therefore impossible if operated correctly. The hydraulically swivelling motor enables cleaning on the right and left side of the carrier vehicle. The brush system is suspended via a freely swivelling suspension point. This allows the brush to adjust its own angle if the panels move during the course of the day and/or the floor contours change. Secure attachment of the...

Drive system Operating temperature range Oil filling Brush material Brush diameter Control system Module overlay pressure security system Swivelling range Spray settings for water Operating pressure of water system Travelling speed during cleaning Water consumption Weight Fully hydraulic -20 / +50 °C Hydraulic oil, SAE 5W30 Certified and UV-resistant 350 mm or 500 mm Foot pedals WashTronic: patented levelling / support pressure mechanism 180°, Cleaning on the left and right side of the carrier vehicle possible One-sided or double-sided spraying Panel arrangement 1 Portrait 2 Portrait 3 Portrait...