NO-FLEX The perfect solution for large modules
8Pages

smLL BALLAST Supporting solar innovation Patented systems NO-FLEX The perfect solution for large modules

An ideal support structure for solar panels on flat surfaces In accordance with the law, we reserve ownership of this design and prohibit any unauthorized reproduction or communication to third parties.

An ideal support structure for solar panels on flat surfaces In accordance with the law, we reserve ownership of this design and prohibit any unauthorized reproduction or communication to third parties.

An ideal support structure for solar panels on flat surfaces KIT NO-FLEX STANDARD THE NEW SOLUTION FOR LARGE PANELS NO-FLEX Standard is a Sun Ballast accessory designed to be inserted on central reinforcement ballasts in order to support large panels and prevent them from bending in the middle. Its “I” shape is designed to be compatible with all inclinations of Standard Sun Ballast systems, from 3° to 30°, with panels laid horizontally. Thickness Weight In accordance with the law, we reserve ownership of this design and prohibit any unauthorized reproduction or communication to third parti

An ideal support structure for solar panels on flat surfaces Panel width from 1100mm Rear view Panel width Side view The p lat from e is suita b 980m m to le for mod 1200 mm w ules ide. USE ONE OF THE TWO 30MM SLOTS TO FIX THE PLATE ON THE CENTRAL REINFORCEMENT BALLASTS, DEPENDING ON THE PANEL WIDTH View of the Standard and No-Flex system from above The 6 support points to which the panel is attached are indicated in red No-Flex ballast No-Flex ballast In accordance with the law, we reserve ownership of this design and prohibit any unauthorized reproduction or communication to third parties.

SUN BALLAST Supporting solar innovation Patented systems KIT NO-FLEX CONNECT THE NEW SOLUTION FOR LARGE PANELS NO-FLEX Connect is a Sun Ballast accessory designed to be inserted on central reinforcement ballasts in order to support large panels and prevent them from bending in the middle. Its “L” shape is designed to be compatible with all inclinations of Connect Sun Ballast systems, from 5° to 30°, with panels laid horizontally. Item Material Thickness Weight Plate Bolt

An ideal support structure for solar panels on flat surfaces Side view Back view Plate Plate USE THE 4CM SLOT TO FIX THE PLATE ON THE CENTRAL REINFORCEMENT BALLASTS CONNECT SYSTEMS 5°-10°-15°;; Panel width from 980mm to 1150mm CONNECT SYSTEM 20°-30°;; Panel width from 980mm to 1050mm View of the Connect and No-Flex system from above The 6 support points to which the panel is attached are indicated in red No-Flex ballast No-Flex ballast No-Flex ballast No-Flex ballast No-Flex ballast No-Flex ballast In accordance with the law, we reserve ownership of this design and prohibit any unauthorized...

smLL BALLAST Supporting solar innovation Patented systems Basic SRL - Via Della Costituzione, 26 42028 Poviglio (RE) Italy - P.Iva: 02557770357 - Tel.: +39 0522 960926 www.sunballast.com - info@sunballast.com