Drying Technology Rotor Wheel Dryers Wheel Dryer based on absorbing wheel technology From PETG to PET means maximum flexibility to a wide range of applications Processing temperature from 55 C° to 180 C° with one standard unit. Adjustable flow rate, all the processing blower has an integrated inverter which adjust the air flow and calibrate the amount of air based on your throughput. Can easily be reconfigurated for a new mold or a new production simply by using the built in material database; you only need to select the material that you are using and the consumption; all the rest it's perform by the dryer itself Low regeneration temperature of just 180 C 0 More responsive: 6 minute time cycle instead NO chilled water required 3 times the amount of pure desiccant 40% energy saving when compared with the most efficient traditional twin desiccant dryer We recently installed two of Summit's Rotor Wheel driers alongside our existing Twin bed desiccant driers. We have found through our own analysis, that as well as not requiring chilled water or compressed air, that Summit's Rotor Wheel uses Simon Smith, UK Purchasing Manager, M&H Plastics, Beccles We've got the right dryer for you... Summit Systems Vanguard, Tame Park, Tamworth,

Rotor Wheel Dryers Model TEMP AIR FLOW REG. FLOW HEATING DEW POINT DO 25 DO 50 DO 80 DO 160 DO 250 55 - 160 °C 55 - 160 °C 55 - 160 °C 55 - 160 °C 55 - 160 °C 6 - 25 cm/h 20 - 50 cm/h 30 - 80 cm/h 3 - 10 cm/h 5 - 15 cm/h 5 - 15 cm/h 75 - 160 cm/h 120 - 250 cm/h 10 - 60 cm/h 10 - 90 cm/h 1,0 KW 2,5 KW 3,5 KW 7,5 KW 9,0 KW 0 - -50 °C 0 - -50 °C 0 - -50 °C 0 - -50 °C 0 - -50 °C Cracks and Flaking Clay Desiccant Crystals Appear Dust Forms Desiccant beads are inefficient and costly Are only 70% pure desiccant 30% clay binder Resin in Process Filter Cooling Coil Process Blower Desiccant Wheel Dry Resin...