Our LPD (low pressure dryers) accelerate the polymer drying process by using a vacuum to lower the boiling point of water from 100°C to 56°C. The moisture is rapidly extracted from the heated material. Leaving it in a condition to be ■ Fully automatic with fail safe alarm as standard ■ Three material canisters internally mounted on a carousel which enables a continuous drying cycle ■ Compact dimensions reduce footprint on shop floor when compared to equivalent desiccant dryers ■ Operator friendly control panel with thumbwheels for setting drying temperature ■ Mobile design with easy access for cleaning ■ Reduction in energy consumption of 70-80% when compared with other material drying ■ Reduction in material drying times - typically a LPD will dry material in Vfe of the time of a more traditional desiccant dryer ■ Reduced maintenance costs when compared with a desiccant dryer ■ Elimination of downtime incurred through material changes as the LPD dries product in ■ 8-12 times less exposure to heat cycle dramatically reducing material degradation ■ No excess material to re bag/decant at material changeover We've got the right dryer for you, Summit Systems Vanguard, Tame Park, Tamworth, Summit Systems Ltd. Company Registration Number: 2489937 SS05

Drying times The above list is just an example of many different materials that can be dried Slash start up times ■ times by fast drying >i Available from Summit Gravimetric blenders, Vacuum hopper loaders, Material dryers, Central material handling, Masterbatch feeders, Granulators/ shredders, Robots/sprue pickers, Product conveying and sorting, Magnetic platens, Material storage, Fabrication, Tool heaters & chillers, Turnkey systems