Catalog excerpts
Sturdy frame made of primary extrusion aluminium section, Alloy 6060, protected by anod Nation average thickness 15 micron. ■ Standard cut-proof,oi(-proofbelt, with smooth green Polyurethane covering (ref. Pantone 120); vulcanised belt joint. ■ Minimum and maamum temperature resistance of belt: -1 O^t to +90T. ■ Standard transmission group consisting of 0.1 2 kW, three-phase, asynchronous motor coupled with worm reduction unit with perrna nent I ubrication. ■ Fijced standard conveyor speed 3 m/min. ■ C onveyor complete with Siemens Start and Stop switch/motor cut-out, with S nn cable and 4P CE plug [3 phases+g round). ■ Standard motor supply voltage 400 Volts/50 Hi. STANDARD DIMENSIONAL FEATURES
Open the catalog to page 1conveyor with adjustable flat upper section Sturdy frame made of primary extrusion aluminium section Alloy 6060 protected by anodisation average thickness ISmicron Standard cut -proof, oi l-proof belt, with green high grip FVC covering (ref. Pantone 320); vulcanised belt joint. Minimum and maximum temperature resistance of belt:-10*C to +60*C. Standard transmission group consisting of 0.12 kW, three-phase, asynchronous motor coupled with worm reduction unit with permanent lubrication. Fised standard conveyor speed 3 rn/min. Conveyor complete with Siemens Start and Stop switch/motor cut-out,...
Open the catalog to page 2:onveyor to work with Robot PA to work with Robot ■ The image alongside shows a PA conveyor, positioned beside the IMM, for collecting and conveying the products ■ In this image, the Robot stacks the product one on top of the other and, after completing this operation, it sends a consent for Start to the conveyor MB control panel. ■ After receiving the signal (A/C voltage-free signal) from the Robot, the control panel activates timed forward movement ofthe conveyor. PA for Robot with Polyca rbonate gua rds ■ The photo alongside shows the PA conveyor complete with The PA model conveyor...
Open the catalog to page 3Top Control panel ins-tailed on PA conveyor to work with Robot ■ Top Control panel installed for control ofthe conveyor to work with Robot. - A'C voltage-free signal corning from the Robot; - photocells, if any (max 3) for control ling - safety microswitch positioned on the openable door ofthe ■ Control panel connection voltage:400 Volts/50 Hz. Standard logics contained inside the MB Top Control panel for control ofthe conveyor working with Robot + The Robot releases the product on the conveyorand sends a voltage-free A'C signal to the MB control panel. ■ The panel sends a Start signalto...
Open the catalog to page 4■ Head roller diameter 120 mm. ■ In this case, the belt t hi ckness is a Iways greater than the conveyor structure. ■ Solution indicated for products with dimensions greater than the working width ■ Head roller diameter 20 mm. ■ This solution facilitates the passage of small products from one conveyor to ■ Head roller diameter 30 mm. ■ This solution facilitates the passage of small products from one conveyor to ■ Head roller diameter 50 mm. ■ This solution facilitates the passage of small products from one conveyor to ■ Head roller complete with roller inserts. ■ This solution facilitates...
Open the catalog to page 5STANDARD SIDE PANELS for PA and PA180 * PA without side panels * In the presence of (ranters workii»g directly * Mien the product width ityitaler ttuntnat oT the conveyor and It is picked up betae I reaches the height 0-1 the transmission * FA without side panels and with motor * For conveying products with dimensions grea:e.' trfn rrc ;c-,/cyor witib. • PA with side parwte matfe of y]fl mm thick Po^zene plate • Solution proposed on request a conveyor iv II■• :i.I KC^I ^irsl? \s.-t\* K. >."t: hi^h speed, wtKh therefore needs a minimum ♦ Afcwltnh. 40 mm. side panels * Sonticn rxorwjwd wten...
Open the catalog to page 6SIDE PANELS * SO mm h. s ide yaneli with poryzene inner * Solution to be proposed when the food/ pharmaceutical producl must not come in contact ™tti non-FEA surfaces. * Side panels mada of Al51 304 stairless h.80 mm complete witfi stum stnp. • Soiutwn to be proposed when the loooy pharmaceutical product must not come in contact wrtti ncn-FTJA aifaces. • The shim strips ensure side sealing ■ Side panels made of MSI 430 stainless • Fcrconwyfufi products in lerse si pes and/ ■ Side cartels, made of MSI 430 signless • For conveying products in large sizes and/ ♦ Sides made of AlSl 430...
Open the catalog to page 7SIDE PANELS * Ptiyzene side panels &d,ustable for ■ For conveying and findine containers and/ or products of different ctrronaons. • Polyzen* sine raneis adinstaue ior wnm, 0\ troduc Is (A iliNerEflt dlirienScmS. • Polyzene side p^anels winch can be adjusted tc* width and h&ight • For conveying and gliding contains and/or products ot drflerent dimensions. arreted for width and height * For conveying aid yuidiny toote rnciUiiiri and large sized products. * Central oarHflons which tan he ad|ust«l • Far conveying different products, which must not mm with one another.
Open the catalog to page 8PAPHOTO GALLERY 9depanels with parallel adjustment ■ The photo alongside shows a solution which makes: it passible to always have perfect parallelism between the side panels whatever their position. ■ Solution to be proposed whenthe product (cardboard or plastic containers) has different dimensions and must be aligned precisely. Flat conveyor complete with adjustable side panels ■ The photo alongside showsthe application oft he adjustable side panels. ■ Note the black coloured plastic clampswhich are usedfor adjusting the width and height ofthe side panels. ■ Each of thethe side panels...
Open the catalog to page 9PAPHOTO GALLERY PA overlapped with unload from Robot ■ The photo alongside shows the great versatility ofthe PA conveyor model. ■ In this application, the PA conveyors creates a product storage warehouse verticalry, to be placed beside the IMM. ■ The offset between conveyors createdintheinitialpartis necessary for accessibility ofthe unloading Robot. ■ Note the supporting legs and protection of the Robot deposit area. PA forming a conveyor line ■ The photo alongside shows a solution forconveying the incoming production from a number of operati ng units. ■ The dimensions ofthe conveyors and...
Open the catalog to page 10All Summit Systems catalogs and technical brochures
-
SINGLE SHAFT SHREDDER: ZSS
2 Pages
-
Gravimetric Doser
2 Pages
-
Volumetric Dosers
2 Pages
-
GSL 200
2 Pages
-
GSL 180
2 Pages
-
Compressed air dryers
2 Pages
-
Low pressure dryers
2 Pages
-
Rotary wheel dryers
2 Pages
-
Sweeper System
2 Pages
-
Vacuum Hopper Loaders
2 Pages
-
Central Material Feed System
2 Pages