*mydirectindustry

PARAMAX ® 9000 Series

Product catalog summary

Introduction
The PARAMAX 9000 Series Industrial Gearbox by Sumitomo Heavy Industries is designed for power transmission and control applications. This document outlines its specifications, construction, and selection guidelines.

Specifications
The gearbox is available in various sizes with specific output torque capabilities. It features a high thermal capacity due to a new fan cooling system and operates with low noise levels.

Construction and Design
The gearbox uses a universal housing for multiple mounting options and employs a 25-degree pressure angle for higher tooth strength. It includes helical gears, taper roller bearings, and oil seals.

Selection and Nomenclature
A flowchart and formula guide the selection of the appropriate gearbox size based on service factors and ambient conditions, with detailed tables for different configurations.

Technical Data
Lubrication methods vary based on shaft speed and orientation. The gearbox is designed for indoor installation in well-ventilated areas. Painting specifications include shot blasting and primer coatings.

Applications
The gearbox is suitable for various applications, supporting a wide range of output torques and compatible with different drive units.

Conclusion
The PARAMAX 9000 Series offers a versatile solution for industrial power transmission, focusing on efficiency and adaptability.

Mechanical Power and Thermal Ratings
Specifications for speed reducers with right angle shaft triple reduction include mechanical and thermal power ratings, nominal reduction ratios, and shaft speeds.

Procedures
Forced oil lubrication is advised for continuous operation, with a formula for calculating mechanical power rating for specific shaft speeds.

Temperature Considerations
Ratings apply for ambient temperatures of 20°C or less, with correction factors for other temperatures.

Selection Tables
Tables guide the selection of reducers based on reduction ratio and shaft speeds, including cooling fan requirements.

Recommendations
For models without fan cooling, interpolation methods are suggested for unlisted speeds, with additional tables for radial and axial loads.

Quadruple Reduction Gearboxes
Specifications include cooling options, operating conditions, and speed ratings, with interpolation methods for unlisted speeds.

Norms and Recommendations
Forced oil lubrication is required for continuous operation, with manufacturer consultation advised for high-speed shaft speeds.

Data Tables
Tables provide power ratings and dimensions for various configurations.

Critical Information
Temperature correction factors and selection guidelines are provided for different ambient conditions.

PARAMAX Speed Reducers
Specifications focus on configurations like vertical split and upright monoblock, with details on shaft types and reduction ratios.

Dimensions
Detailed measurements for sizes and components are provided, with installation and lubrication guidelines.

Painting and Rust Proofing
Specifications include paint types and coating thicknesses for different conditions.

Technical Data
Includes moment of inertia and GD2 values for shaft configurations, with supplementary dimension drawings.

Torque Arm Specifications
Guidelines for installation and use of torque arms are provided, emphasizing strength against shock loading.

Technical Specifications and Procedures
Details on torque arm mounting, hollow shaft dimensions, and cooling fan dimensions are included.

Key Data Tables
Extensive tables detail dimensions and specifications for various components.

Mechanical Components
Specifications for gear reducers and associated parts include shaft sizes, oil seals, and housing types.

Procedures
Instructions for mounting components and securing shafts are provided, with recommendations for seal types based on conditions.

Critical Information
Emphasizes the importance of correct seal selection and component mounting for reliability.

Technical Specifications and Options
Details on shaft reductions and mounting configurations, with specifications for internal components and environmental recommendations.

Catalog excerpts

France SM-Cyclo France SAS (SMFR) 8 Avenue Christian Doppler, 77700 Serris, France TEL (33)164171717 FAX (33)164171718 Italy SM-Cyclo Italy Srl (SMIT) Via dell' Artigianato 23, 20010 Cornaredo (MI), Italy TEL (39)293-481101 FAX (39)293-481103 |Spain| SM-Cyclo Iberia, S.L.U. C/Gran Via n° 63 bis planta primera, oficina 1B 48011 Bilbao - Vizcaya, Spain TEL (34)944-805389 United Kingdom SM-Cyclo UK Ltd. (SMUK) Unit 29, Bergen Way, Sutton Fields Industrial Estate, Kingston upon Hull, HU7 0YQ, East Yorkshire, United Kingdom TEL (44)1482-790340 FAX (44)1482-790321 Turkey SM Cyclo Turkey Gu^ Aktarim Sis. Tic. Ltd. Sti. (SMTR) Buyukdere £ayirba$i Cd. Dede Yusuf Sk. No:11, 34453 Sariyer Istanbul, Turkey TEL (90)216-384-4482 FAX (90)216-384-4482 China Sumitomo (SHI) Cyclo Drive China, Ltd. (SCT) 11F,SMEG Plaza, No.1386 Hongqiao Road, Changning District, Shanghai, China (P.C.200336) TEL (86)21-3462-7877 FAX (86)21-3462-7922 |Hong Kong| SM-Cyclo of Hong Kong Co.,Ltd. (SMHK) Rm 1301, CEO Tower, 77 Wing Hong Street, Cheung Sha Wan, Kowloon, Hong Kong TEL (852)2460-1881 FAX (852)2460-1882 Korea Sumitomo (SHI) Cyclo Drive Korea, Ltd. (SCK) Royal Bldg. 9F Rm.913, 5 Danju-Dong, Chongro-Ku, Seoul, Korea 110-721 TEL (82)2-730-0151 FAX (82)2-730-0156 Taiwan Tatung SM-Cyclo Co., Ltd. (TSC) 22 Chungshan N. Road 3rd., Sec. Taipei, Taiwan 104, R.O.C. TEL (886)2-2595-7275 FAX (886)2-2595-5594 |Singapore| Sumitomo (SHI) Cyclo Drive Asia Pacific Pte. Ltd. (SCA) 15 Kwong Min Road, Singapore 628718 TEL (65)6591-7800 FAX (65)6863-4238 |Philippines| Sumitomo (SHI) Cyclo Drive Asia Pacific Pte. Ltd. (SMPH) C4 & C5 Bldg. Granville Industrial Complex Governor's Drive, Bo. Bancal, Carmona, Cavite 4116 Philippines TEL (63)2-584-4921 FAX (63)2-584-4922 TEL (63)46-430-3591 TEL (63)46-482-0580 TEL (63)46-482-0581 |Vietnam| SM-Cyclo (Vietnam) Co., Ltd. (SMVN) Factory 2B, Lot K1-2-5,Road No.: 2-3-5A, Le Minh Xuan Industrial Park, Binh Chanh Dist., HCMC, Vietnam. TEL (84)8-37-663-709 FAX (84)8-37-663-710 Malaysia SM-Cyclo of Malaysia Sdn. Bhd. (SMMA) No.7C, Jalan Anggerik Mokara 31/56, Kota Kemuning, Seksyen 31, 40460 Shah Alam, Selangor D.E., Malaysia TEL (60)3-51210455 FAX (60)3-51210578 Indonesia PT. SM-Cyclo Indonesia (SMID) Cikarang Jalan Sungkai Blok F 25 No.09 K, Delta Silicon III, Lippo Cikarang, Bekasi, Indonesia TEL (62)21-2961-2100 FAX (62)21-2961-2211 |Thailand] SM-Cyclo (Thailand) Co., Ltd. (SMTH) 195 Empire Tower, 21st Fl., Unit 2103-4, South Sathorn Rd., Yannawa Sathorn, Bangkok 10120, Thailand TEL (66)2-670-0998 FAX (66)2-670-0999 Australia Sumitomo (SHI) Hansen Australia Pty. Ltd. (SHAU) 181 Power Street Glendenning NSW 2761, Australia TEL (61)2-9208-3000 FAX (61)2-9208-3050 India Sumi-Cyclo Drive India Pvt. Ltd. (SMIN) Survey No.130, Hissa No.02, Jeevan Nagar, Off Mumbai-Bangalore bypass, Tathawade, Pune-411 033, India TEL (91)20-6674-2900 FAX (91)20-6674-2901 |Japan| Sumitomo Heavy Industries, Ltd. ThinkPark Tower, 1-1 Osaki 2-chome, Shinagawa-ku, Tokyo 141-6025, Japan TEL (81)3-6737-2511 FAX (81)3-6866-5160 Sumitomo DriveTechnologies PARAMAX 9000 Series Industrial Gearbox |Belgium| Belgium, Netherlands, Luxemburg Hansen Industrial Transmissions NV Leonardo da Vincilaan 1-3 2650 Edegem, Belgium TEL (32)3-450-12-11 Specifications, dimensions, and other items are subject to change without prior notice. <#► Sumitomo Heavy Industries, Ltd. Power Transmission & Controls Group Headquarter ThinkPark Tower, 1-1 Osaki 2-chome, Shinagawa-ku, Tokyo 141-6025, Japan ♦ Sumitomo Heavy Industries, Ltd. No.G2020E-2

Open the catalog to page 1

INDEX Features Available Combination Introduction of Application Introduction of Applied Product Reducer Standard Specifications Construction Drawing Nomenclature Selection Service Factor SF Selection Tables and Dimension Tables Right Angle Shaft Parallel Shaft Technical Data Lubricant and Installation Painting Specifications and Rust Proof Standard Moment of Inertia Supplementary Dimension Drawing Supplementary Matters to Hollow Shaft Hollow Shaft Related Dimensions Cooling Fan Dimension Option Dimension

Open the catalog to page 2

Features JUST FIT SIZE 26 sizes variation for most accurate economical selection. Prepared full range 26 sizes variation. Fitness size selection available for every requested torque. Customer's wide design availability with most accurate economical selection. LARGER THERMAL CAPACITY Advanced thermal capacity by new designed fan cooling system. (Option) New designed fan and conducted air cowling gain larger thermal capacity. This system benefits for severe situation like continuous operation, even if compact size. LOW NOISE Low noise resulting from optimized gear tooth profile modification and...

Open the catalog to page 3

AVAILABLE COMBINATION Reducer Reducer: Right Angle Reducer: Parallel

Open the catalog to page 5

INTRODUCTION OF APPLICATION With Motor Common base Double Stack Single stage Drive unit right angle Drive unit parallel Reducer Top mount Steel housing Right angle Mounting Parallel Special slow speed shaft Upright wall mount Upright mount Vertical mount Drop bearing housing Ceiling mount Hollow shaft

Open the catalog to page 6

Introduction of Applied Product M Series Drive Units Standard Output Torque 0.8 77.4kNm Catalogue No.W0101E precision type Output Torque 0.8 20kNm HEDCON with Cyclo Output Torque 2.8 20kNm

Open the catalog to page 7

<Reducer: Parallel Shaft-Horizontal Mounting> Selection Flowchart and Formula for Selection ■■■ Right Angle Shaft ■■■

Open the catalog to page 8

Speed Reducer Dimension Selection Tables Tables Note : In general, a heating or cooling system is necessary when ambient temperature is lower than -10°C or higher than 50°C. e.g. High temperature gas or liquid passes through the hollow shaft. Consult us when substances lower than -10°C or higher than 50°C will be in contact with PARAMAX DRIVES.

Open the catalog to page 9

Reducer Nomenclature Dimension Selection Tables Tables 1. For shaft arrangement, refer to the dimension sheets. 2. Consult us for reduction ratios smaller than 6.3. Number of Gear Stages Shaft Position Double Reduction Right Angle Quadruple Reduction

Open the catalog to page 11

Reducer Nomenclature Shaft Arrangement Slow Speed Shaft (Blank) Option (Blank) Solid Shaft Without option LR Hollow Shaft (Shrink Disk Type) Wall Mount (Upright Mounting) Hollow Shaft (Key Type)

Open the catalog to page 12

All SUMITOMO (SHI) Cyclo Drive Germany GmbH catalogs and technical brochures

Archived catalogs

Product overview
16 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list