IB Series catalogues
94Pages

Sumitomo DriveTechnologies Low-Backlash Planetary Gear Reducer for Servo Motors More Reduction Ratios! 1/3.7,1/11,1/81 Three-Minute Backlash Available!

Features Standard Specication, Construction, and Mechanism Nomenclature Selection Table 1 (Frame Size Combination Table for Each Motor Rated Speed) Selection Table 2 (Frame Size Combination Table for Each Servo Motor Manufacturers) 1. Yaskawa Electric Corporation 2. Mitsubishi Electric Corporation 3. Matsushita Electric Industrial Co., Ltd. 4. Sanyo Denki Co., Ltd. 5. Fuji Electric FA Components & Systems 6. FANUC Ltd. 7. KEYENCE Selection Table 3 (Rating Table) (Allowable External Rating) Selection Procedure Dimension Drawings Solid Shaft Flange Shaft Durability Check of Output Shaft Part...

Low-backlash Planetary Gear Reducer for Servo Motors Bearing of output Angular contact ball bearings Output shaft Planetary gear of output Sun gear of output Coupling Specification Backlash Initial backlash setting is 3 or 15-minute Rated torque 10.5-101Nm Motor capacity 50W-5000W Reduction ratio 1/3.7,1/5,1/9,1/11,1/15,1/21,1/33,1/45,1/81 Allowable maximum input speed 6000r/min Reduction system Planetary gear mechanism Features No.1 Compactness in the Industry Large diameter precision angular bearing, supporting output shaft, allows large radial load with compact casing. Responsiveness to...

Significant size and mass reduction in low reduction ratio and medium capacity range. Existing Product Existing Product Comparison of Reduction Ratio 5 for 3500W Comparison of Reduction Ratio 5 for 1500W Output shaft Variation Three variations available to match customers' needs. Optimal selection possible for your application. Keyless solid shaft type I Flange shaft type ■ Solid shaft type with keyway Simple assembly. Directly connect servo motor and reducer with bolt (provided by customer) after delivery. Tighten motor shaft with hexagon wrench. Ready for Keyless Type Servo Motor Input...

Motion Control Drive Motion Control Drives Product Lineup Flat type component Lost motion Speed Reducer for Servo Motors Solid shaft type Flange shaft type This catalog Standard Backlash IB Series Manufacture Range Motor Rated Speed 3000 [r/min Reduction ratio of Ltype: 1/20 for *1 and 1/29 for *2

Motion Control Drive of Sumitomo Drive Technologies are available for various areas requiring precision control. Recommended models: F CYCLOR DRIVE F Series IB IB Series SV CYCLOR DRIVE for servo motors Application Examples F IB F Machine Tool Automatic Pallet Changer Drive Industral Robot Axis Driving, Robot Slider F IB SV F IB Machine Tool Automatic Pallet Pool Drive Machine Tool Magazine Drive F SV IB SV FA Equipment (AGV Driving) Peripheral Equipment for Machine Tool Loader, Unloader F IB IB Packaging Machine (Pillow-Shape Wrapping Machine) Liquid Crystal Transfer Robot Axis Driving,...

Standard Specication, Construction, and Mechanism Standard Specication Backlash Initial backlash setting is 3 or 15-minute. Efciency 90% or more at rated output torque (with reduction ratio 3.7, 5, 9) Noise Level 70dB(A) 0.5m *Varies depending on models and mounting condition. Lubrication system Grease lubrication The unit is lled with grease at the time of shipping. It is ready for immediate use. Reduction system Planetary gear mechanism Single stage type (Reduction Ratio: 3.7, 5, 9) Double stage type (Reduction Ratio: 11, 15, 21, 33, 45, 81) Output shaft rotation direction Same direction...

Nomenclature - P120 F - 7A LD - 15 Special Reduction Ratio Input Method Mounting (Flange Attachment Type) P1 Type A N F X Backlash Symbol Motor Flange Code 3 min specication: L3 15 min specication: LD Output Shaft Direction (Unlimited Mounting Direction) Output Shaft Type Solid Shaft (Keyless) Symbol N Solid Shaft (with Key) MC Drive IB Series W Flange Shaft F Type and Frame Size 110 P 120 130 7

Selection Table 1 (Frame Size Combination Table for Each Motor Rated Speed) Rated Motor Speed 1000 [r/min] Rated Motor Speed 1500 [r/min] Rated Motor Speed 2000 [r/min] Rated Motor Speed 4000 [r/min] Rated Motor Speed 3000 [r/min] Servo Moto Reduction Ratio No Load Running Torque [SI Unit] Reduction Ratio No Load Running Torque [Engineering Unit] Reduction Ratio •Torque necessary at the input side to rotate the reducer at no load This is the representative value when the ambient temperature is •Refer to Selection Table 2 (on pages 9-18) for frame size combination for each servo motor...

Selection Table 2 (Frame Size Combination Table for Each Servo Motor Manufacturers) 1. Yaskawa Electric Corporation IV Series SGMJV Series (Rated speed: 3000 r/min) IV Series SGMAV Series (Rated speed: 3000 r/min) IV Series SGMGV Series (Rated speed: 1500 r/min) Page of Dimension Table [Page] Note: 'Refer to Selection Table 3 (on pages 20, 22-23) for rated torque, allowable maximum input speed, allowable peak torque, and allowable radial load for each frame size. •Check the value of no load running torque in Selection Table 1 (page 8) when using the combinations marked with A. Consult us...

Selection Table 2 (Frame Size Combination Table for Each Servo Motor Manufacturers) Mitsubishi Electric Corporation HC-MFS Series (Rated speed: 3000 r/min) HC-SFS Series (Rated speed: 2000 r/min) HC-UFS Series (Rated speed: 2000 r/min) Page of Dimension Table [Page] Note: 'Refer to Selection Table 3 (on pages 20, 22-23) for rated torque, allowable maximum input speed, allowable peak torque, and allowable radial load for each frame size. •Check the value of no load running torque in Selection Table 1 (page 8) when using the combinations marked with A. Consult us for larger no load running...

Selection Table 2 (Frame Size Combination Table for Each Servo Motor Manufacturers) 3 is Series (Rated speed: 4000-2000 r/min) Applies to rated speed torque. a is Series (Rated speed: 4000-2000 r/min) Page of Dimension Table [Page] Note: 'Refer to Selection Table 3 (on pages 20, 22-23) for rated torque, allowable maximum input speed, allowable peak torque, and allowable radial load for each frame size. •Check the value of no load running torque in Selection Table 1 (page 8) when using the combinations marked with A. Consult us for larger no load running torque is larger. Specialized units...