High efficiency shoulder milling cutter Ideal for high-efficiency machining of titanium alloys, such as aerospace components A selection of corner radiuses capable of handling large ramping angles

WSE Series ■ Features • Ideal for machining titanium alloys for aerospace Designed for machining at large ramping angles, coupled with a selection of corner radiuses, makes it applicable for a variety of applications including titanium structural parts • Stable and long tool life in machining titanium alloys The optimized cutting edge shape together with newly developed ACS2500/ACS3000 grades (for machining exotic alloys) result in excellent wear resistance and fracture resistance • Optimized cutting edge shape and chip pocket for excellent chip evacuation ■ Product Range Number in •• shows the...

WSE Series ■ Grade Features New PVD Coating Features Work Material PVD ■ Grade Application Range The newly developed ACS2500/ACS3000 grades ideal for machining titanium alloys, heat-resistant alloys and stainless steel are now available! Ultra-fine grained B additive • New AlTiBN coating, with an ultra-fine coating structure, achieves high strength and toughness • Outstanding chipping resistance and wear resistance — High Adhesion Strength Significantly improved coating adhesion and more than 2x conventional chipping resistance |Work Material ■ Chipbreaker Shape ■ Excellent Chip Control Work...

■ Body (Shell Type) Dimensions (mm) Recommended Tightening Torque (N-m) O mark: Japan stock

Exotic Alloy WSE 16000RS Type■ Insert Grade Classification Fig 1 Fig 2 Precautions for Mounting Inserts (1) Clean the mounting seat surface and contact parts. (2) While pressing the insert firmly against the seat surface, tighten the screws with the included wrench. (3) Apply Anti-seizure Cream to the screws and tighten at the recommended torque. (4) After tightening, check that there are no gaps on the seat surface. *Modification of the cutter body is required when mounting an insert with corner radius 5.0 or higher. Gap ■ Recommended Cutting Conditions ISO • The recommended cutting conditions...

■ Body (Shank Type) Recommended Tightening Torque (N-m) O mark: Japan stock

Exotic Alloy WSE 16000E Type■ Insert Grade Classification Fig 1 Fig 2 Precautions for Mounting Inserts (1) Clean the mounting seat surface and contact parts. (2) While pressing the insert firmly against the seat surface, tighten the screws with the included wrench. (3) Apply Anti-seizure Cream to the screws and tighten at the recommended torque. (4) After tightening, check that there are no gaps on the seat surface. *Modification of the cutter body is required when mounting an insert with corner radius 5.0 or higher. Gap ■ Recommended Cutting Conditions ISO • The recommended cutting conditions...

Titanium Alloy Ti-6Al-4V Aerospace Component Titanium Alloy Ti-6Al-4V Aerospace Component SUMITOMO ELECTRIC Hartmetall GmbH Konrad-Zuse-StraUe 9, 47877 Willich SUMITOMO ELECTRIC Hardmetal Ltd. 3 Paper Mill Drive Redditch, B98 8QJ, UK