Group: Sumitomo
Catalog excerpts
Sumitomo DriveTechnologies INNOVATIVE DRIVE TECHNOLOGY FOR DECANTERS AND CENTRIFUGES CENTRIFUGE DRIVES - ZS/ZSP/ZP
Open the catalog to page 1Innovative drive technology for decanters and centrifuges Centrifuge drives by Sumitomo Drive Technologies are optimally suited for use in decanters and screen scroll centrifuges. A comprehensive product programme with a focus on quality and reliability make our gearboxes the most commonly used drives for centrifuges. The uses for our gearboxes span the entire bandwidth of centrifuge applications: from wastewater treatment to the extraction of olive oil, wine and other foods, bioethanol and petrochemicals, chemical raw materials and drilling sludge treatment as well as salt extraction and...
Open the catalog to page 2Product lines ZS – Cyclo Line The compact and high-capacity centrifuge drive in a flange design and all-steel construction. ZS – Cyclo Line ZSP – Cyclo/Planet Line The two-stage, high-capacity centrifuge drive for high reduction ratios and differential speeds with a proven flange design and all-steel construction. ZSP – Cyclo/Planet Line ZP – Planet Line The highly dynamic centrifuge drive for high drum and differential speeds with a proven flange design and all-steel construction.
Open the catalog to page 3ZS – Cyclo Line Single stage Cyclo rotation gearbox ZS – Cyclo Line. The compact and high-capacity centrifuge drive in a flange design and all-steel construction. The eccentric gearbox, based on two or three cycloid discs, allows high reduction ratios of up to 87:1 in a single stage. This allows for a very compact and short design. High reserves in the event of overload and few moving parts are the basis for this rugged and efficient input. The high efficiency is based on the pure roll-off movement on the cycloid disks and low splashing losses, which result from the small internal movements...
Open the catalog to page 4■ "Internal" drives according to customer specifications ■ Special seals ■ ATEX certification in accordance with Group II ■ Food grade version ■ V-belt pulley for drum ■ Oil once-through lubrication or oil compensation tank x: available * ZS and ZS-M: Compact drive ZS - Cyclo Line ZS-L high-performance centrifuge drive Customer-specific centrifuge drive
Open the catalog to page 5ZSP – Cyclo/Planet Line Double stage Cyclo/Planetary rotation gearbox ZSP – Cyclo/Planet Line. The double-stage, high-load centrifuge gearbox for reduction ratios and differential speeds with a proven flange design and all-steel construction. The double stage input uses the reliable, high load Cyclo stage on the scroll side – i.e. where high torque loads occur. This Cyclo stage has also featured in the ZS – Cyclo Line series. Combination with a planetary stage enables exceptionally high reduction rates of up to 348/1. High differential speeds can also be achieved. Drives in the ZSP –...
Open the catalog to page 6■ Food grade version ■ Special seals ■ ATEX certification in accordance with Group II ■ Oil throughput or circular oil lubrication or with connection to an oil expansion tank ■ V-belt pulley for drum x: available * ZSPN-L high-performance drive for centrifuges with a trailing scroll ZSPR-L differential - high-performance drive for centrifuges with a leading scroll x: available * ZSPV-L high-performance drive for centrifuges with a leading scroll ZSPV-L high-performance regulated drive for centrifuges with a trailing scroll x: available * ZSPN compact drives for centrifuges with a trailing...
Open the catalog to page 7ZP – Planet Line Double or triple-stage planetary rotation gearbox ZP – Planet Line. The highly dynamic centrifuge drive for high drum and differential speeds with a proven flange design and all-steel construction. Scroll connection with DIN5480 hollow shaft. The ZP – Planet Line series is available as a double or triple-stage planetary drive in six sizes, ranging from 5 kNm to 40 kNm. It covers the complete range of reduction ratios from 20/1 to 224/1. High power density and small exterior dimensions are a characteristic of this series. This makes it outstandingly well-suited for...
Open the catalog to page 8■ Food grade version ■ Special seals ■ ATEX certification in accordance with Group II ■ Oil throughput or circular oil lubrication or with connection to an oil expansion tank ZP - Secondary drives Four different single stage ZP sizes from 40 to 800 Nm are also available for centrifuges with two drives (internal primary gearbox for high torque values and external secondary gearbox to increase the reduction ratio). x: available * ZPN for centrifuges with a trailing scroll (all reduction ratios) * ZPV for centrifuges with a leading scroll (three-stage from i - 60) * ZPR regulated drive for...
Open the catalog to page 9The evolution of the Sumitomo centrifuge drives... 1949 First cycloid ZS centrifuge drive for screening technology 2000 Introduction of the ZS - Cyclo Line centrifuge drive to basic drive 2014 ZP - Planet Line: Planetary gearboxes for external drives 1994 Introduction of the ZSP - Cyclo/Planet including the ZSPR regulated drive 2006 Project-based centrifuge drive based on planetary gearbox technology 2016 Introduction of ZS-L - Cyclo Line and ZSP-L - Cyclo/Planet Line high-performance drives Our expertise in drive technology - your competitive advantage in the separation industry ■ Team...
Open the catalog to page 10Environmental technology ■ Sludge dewatering ■ Thickening of excess sludge ■ Partial dewatering of sludge for agricultural use ■ Process recycling of e.g. coolant liquids, drilling sludge, water etc. Food and raw food materials ■ Oils (olive oil, palm oil, soya proteins etc.) ■ Starch (maize, potato, wheat etc.) ■ Recycling of edible fats ■ Wine, juice ■ Coffee, milk powder ■ Extracts and concentrates ■ Table salt ■ Sugar, lactose ■ Food supplements Chemistry ■ Raw materials of organic and anorganic chemistry - Extraction of metals - Resins and lacquers - Alkalis, acids and industrial salts...
Open the catalog to page 11World Headquarters JAPAN Sumitomo Heavy Industries Ltd. PTC Group Think Park Tower, 1-1, Osaki 2-chome, Shinagawa-ku, Tokyo 41-6025, Japan www.cyclo.shi.co.jp www.sumitomodrive.com Headquarters & Manufacturing EUROPE Germany Sumitomo (SHI) Cyclo Drive Germany GmbH European Headquarters CyclostraRe 92 85229 Markt Indersdorf Germany Tel. +49 8136 66-0 Fax +49 8136 5771 Email: marktind@sce-cyclo.com www.sumitomodrive.com Subsidiaries & Sales Offices in Europe Austria Sales Office Austria GruentalerstraRe 30 A 4020 Linz Austria Tel. +43 732 330958 Fax +43 732 331978 Benelux Sales Office Benelux...
Open the catalog to page 12All SUMITOMO Drive Technologies America catalogs and technical brochures
-
Fine Cyclo
70 Pages
-
PARAMAX ® 9000
281 Pages
-
ALTAX NEO
39 Pages
-
E CYCLO
28 Pages
-
Cyclo® BBB5 Bevel Buddybox®
270 Pages
-
IB P2 Catalog
36 Pages
-
IB PK1 Catalog
70 Pages
-
IB-P1 Catalog
94 Pages
-
Fine Cyclo Catalog
123 Pages
-
Hansen P4 Multistage (Metric)
140 Pages
-
Hansen P4 Multistage (Inch)
86 Pages
-
Fine Cyclo D series
30 Pages
-
Fine Cyclo UA Catalog
4 Pages
-
Servo PPG
4 Pages
-
IB Series P1 Catalog
94 Pages
-
Motion Control Drives
2 Pages
-
Centrifuge Reducers
2 Pages
-
4000 SERIES BEIER VARIATORS
3 Pages
-
standardized gear units
135 Pages
-
FINE CYCLO
2 Pages
-
Catalogue 999217/EN/DE
186 Pages
-
HF430 Catalog
31 Pages
-
Cyclo BBB4 Trifold Brochure
4 Pages
-
IB P Type Catalog
68 Pages
-
HF320a Complete Catalog
8 Pages
-
HSM complete catalog
64 Pages
-
SPA Series
10 Pages
-
Hedcon catalog
23 Pages
-
Astero® series
95 Pages
-
Sub-Fractional Hyponic catalog
80 Pages
-
Beier® Variator catalog
52 Pages
-
Servo
114 Pages
-
SFC Cooling Tower Drives
18 Pages
-
Cyclo® 6000 reducer complete catalog
166 Pages
Archived catalogs
-
Seisa Compower DP1000 Series Catalog
145 Pages
-
Seisa Gear Coupling Catalog
28 Pages
-
Servo 100 Catalog
114 Pages
-
Paramax® 9000 catalog
352 Pages
-
IB P1 series
93 Pages
-
Fine Cyclo®
22 Pages