*mydirectindustry

Paramax® 9000 catalog

Product catalog summary

Introduction
This document outlines the specifications and guidelines for the PARAMAX 9000 Series Reducer and Drive Units, covering standard specifications, construction, selection criteria, and service factors.

Standard Specifications
The PARAMAX 9000 Series includes drive units and reducers with capacities from 5.5kW to 55kW, designed for continuous operation. They are available for indoor and outdoor use, with corrosion-proof options, and conform to JIS, CE, or UL standards.

Construction and Design
The units feature a direct motor mount design for right-angle types, eliminating input coupling and alignment needs. A new fan cooling system enhances thermal capacity, and the universal housing allows for various mounting positions.

Selection and Service Factor
Selection tables guide the choice of drive units based on output speed, ratio, and motor power. The service factor (SF) is determined by load type and operating hours, with a typical SF of 1.25 for standard applications.

Technical Data
Includes lubricant and installation guidelines, painting specifications, and rust-proof standards. It also covers moment of inertia, supplementary dimension drawings, and cooling fan dimensions.

Features
The series is designed for low noise and high tooth strength, with optimized gear tooth profiles and rigid housing. It offers a wide range of size variations for accurate and economical selection.

Available Combinations
Lists available combinations of drive units and reducers, including right-angle and parallel shaft configurations, with detailed motor specifications.

Conclusion
The PARAMAX 9000 Series provides versatile and robust solutions for industrial drive applications, focusing on efficiency, reliability, and adaptability.

Specifications

Speed: 33 r/min
Load: Uniform load for 14 hours/day
Mounting: Right Angle Shaft Horizontal
Sprocket: Single row
Shaft Position: Center of solid shaft, Downward
Voltage: 200V, 50Hz, without brake, indoor use
Radial Load: 10.6 kN
Thrust Load: 0 kN

Drive Unit Selection

Selection based on AGMA standards and Sumitomo's experience.
For electric motors as prime movers, add 0.25 to the SF if a multi-cylinder combustion engine is used.
Consult for special duty or safety specifications.

Service Factor (SF) for Various Applications

Specific SF values for crane operations, conveyors, elevators, metal mills, etc., based on operating hours and load type.

Drive Unit Specifications

Right Angle Shaft configurations with various kW ratings and SF values for different reduction ratios and speeds.

Overview
Details technical specifications and guidelines for speed reducers, focusing on right angle shaft configurations, service factors, thermal and mechanical power ratings.

Specifications
Outlines configurations for speed reducers, including wall mount, upright mounting, and hollow shaft types.

Procedures
Includes determining the service factor, calculating equivalent transmission power, and checking thermal power.

Standards and Recommendations
References AGMA standards and provides service factor values based on SUMITOMO's experience.

Tables and Data
Contains tables detailing mechanical and thermal power ratings, allowable loads, and dimension tables.

Critical Information
Emphasizes selecting the correct service factor and checking thermal power ratings.

Overview
Provides specifications and guidelines for parallel shaft triple and quadruple reduction gear units.

Specifications

Nominal Reduction Ratios: 56 to 140.
Speed Ratings: High-speed shaft speeds for 1800 to 750 r/min.
Cooling Options: Models with and without fan cooling units.

Procedures

Oil Lubrication: Required for continuous operation.
Interpolation Method: For high-speed shaft speeds not listed.

Standards and Recommendations

Temperature Correction: Use correction factors for temperatures other than 20°C.

Data Tables

Mechanical and Thermal Power Ratings: Detailed tables for different configurations.

Critical Information

Ensure proper lubrication and cooling.

Overview
Specifications and dimensions for parallel shaft double and triple reduction gearboxes, focusing on the PARAMAX series.

Specifications

Models: 9015 to 9115.
Shaft Types: Solid shafts, hollow shafts with shrink disk type, and hollow shafts with key type.

Dimensions

Parallel Shaft Double Reduction: Models 9015 to 9055 and 9060 to 9085.

Procedures and Standards

Key and Keyways: Based on ISO and JIS standards.

Additional Notes

Consult additional documentation for complete details.

Installation Guidelines
Install horizontally on a rigid base, use JIS strength classification 10.9 bolts, and refer to the maintenance manual for additional notes.

Lubrication Requirements
Supply oil within the range indicated on the dipstick before operation, with specific recommendations for extreme temperatures.

Rust Proofing Specifications
Standard rust proofing involves applying rust-proof oil before shipment.

Painting Specifications
Different painting classes for various environmental conditions.

Technical Data
Tables provide specifications for lubricant viscosity, moment of inertia, and GD2 values.

Mounting and Removal Procedures
Detailed procedures for shrink disk and key coupling mounting and removal.

Technical Data
Includes hollow shaft related dimensions and cooling fan dimensions.

Option Dimensions
Details on air breather, drain valve, and oil level gauge dimensions.

Motor Terminal Box
Specifications for motor terminal box drive units.

Drive System Formulas
Formulas for calculating revolving speed, torque, power, and acceleration force.

Warranty Information
Warranty period is 18 months from delivery or 12 months from operation.

Safety Precautions
Adherence to safety rules and standards is emphasized.

Catalog excerpts

Worldwide Sumitomo Network Sumitomo Machinery Corporation of America (SMA) 4200 Holland Blvd. Chesapeake, VA 23323, U.S.A. SM-Cyclo de Argentina S.A. (SMAR) Buenos Aires, Argentina SM-Cyclo Reductores do Brasil, Ltda. (SMBR) Av. Fagundes Filho, 191 Metro Sao Judas Edificio Houston-Sala H123 Sao Paulo-SP SM-Cyclo de Chile, Ltda. (SMCH) San Pablo Ave, 3507 Quinta Nomal, Santiago, Chile SM-Cyclo de Mexico, S.A. de C.V. (SMME) Calle "C" No. 506A Parque Industrial Almacentro Apodaca, N. L, Mexico 66600 1045 South Service Road West, Oakville, Ontario, Sumitomo(SHI) Cyclo Drive Germany GmbH (SCG) CydostraBe 92,85229 Markt Indersdorf, Germany SCG Branch Austria Office GruentalerstraBe 30A, 4020 Linz, Austria SCG Branch Benelux Office Office Heikneuterlaan 23,3010 Kessel-Lo/Leuven, SM-Cyclo France E.U.R.L. (SMFR) 65-75 Avenue Jean Mermoz, Espace Primagaz, 93126 SM-Cyclo Italy Sri (SMIT) Via dell1 Artigianato 23,20010 Cornaredo(MI), Italy SM-Cyclo Iberia, S.L.(SMIB) Edificio Gobelas, C/Landabarri, n° 4 Escalera 1,2° Izqda, Leioa 48940 Vizcaya, Spain SM-Cyclo Scandinavia AB(SMSC) Ridbanegatan 4,5-21377 Malmo, Sweden Sumitomo(SHI) Cyclo Drive China, Ltd. (SCT) 13 Floor, No. 1698 Yishan Rd, Shanghai, China 201103 Hong Kong SM-Cyclo of Hong Kong Co., Ltd. (SMHK) Unit 1802,18/F, Park Building, 476 Castle Peak Road, Kowloon, Hong Kong Sumitomo(SHI) Cyclo Drive Korea, Ltd. (SCK) Royal Bldg. 9F Rm. 913,5 Danju-Dong, Chongro-ku, 22 Chungshan N. Road 3rd., Sec. Taipei, Taiwan 104, Sumitomo(SHI)Cyclo Drive Asia Pacific Pte. Ltd.lSCA) 15 Kwong Min Road, Singapore 628718 SCA Branch Office in Philippines B2b Granville Industrial Complex, Governor's Drive, Bo, Bancal, Carmona 4116 Cavite, Philippines SCA Representative Office in Ho Chi Minh Floor 4,99 Hguyen Thi Minh Khai Street World Ben Thanh, No. 2, Jalan BP 4/1, Bandar Bukit Puchong, 47100 Puchong, Selangor Daml Ehsan, Malaysia 195, Empire Tower 21st Fl, Unit 2103-4, South Sathorn Road, Yannawa Sathorn Bangkok 10120, 9 Holbeche Rd, Arndell Park, NSW, 2148, Australia Sumi-Cyclo Drive India Private Limited Survey No. 130, Hissa No. 02, Jeevan Nagar Next to TVS Logistics, Off Mumbai-Bangalore bypass, Sumitomo Heavy Industries, Ltd. Address: ThinkPark Tower, 1-1, Osaki 2-Chome, Shinagawa-ku, Tokyo 141 -6025, Japan Unit 29, Bergen Way, Sutton Fields Industrial Estate, Kingston upon Hull, HU7 0YQ, East Yorkshire, United Kingdom ♦ Sumitomo Heavy Industries, Ltd. Sumitomo DriveTechnologies Reducer & Drive Units

Open the catalog to page 1

INDEX A Features Available Combination Drive Units and Reducers Basic Motor Introduction of Application B Drive Unit Standard Specications Construction Drawing Nomenclature Selection Service Factor SF Selection Tables and Dimension Tables Right Angle Shaft Parallel Shaft C 2 3 4 6 8 B- 11 B- 73 Reducer Standard Specications Construction Drawing Nomenclature Selection Service Factor SF Selection Tables and Dimension Tables Right Angle Shaft Parallel Shaft D BBBBB- CCCCC- 2 3 4 6 8 C- 11 C-101 Technical Data Lubricant and Installation Painting Specications and Rust Proof Standard Moment of Inertia...

Open the catalog to page 2

Features JUST FIT SIZE 26 sizes variation for most accurate economical selection. Prepared full range 26 sizes variation. Fitness size selection available for every requested torque. Customer's wide design availability with most accurate economical selection. NEW DESIGN CONCEPT Size 9015 9025 9030 9035 9040 9045 9050 9055 9060 Output Torque 2.6 4.2 6.4 8.5 10.1 13.2 15.3 19.9 24.4 Size 9065 9070 9075 9080 9085 9090 9095 9100 9105 Output Torque 31.4 38.2 47.8 58.5 73.1 85.9 101 122 144 Size 9110 9115 9118 9121 9126 9128 9131 9136 Output Torque 174 207 260 301 351 420 473 552 Direct motor mount...

Open the catalog to page 3

Features LOW NOISE Low noise resulting from optimized gear tooth prole modication and rigid housing design. FEM analysis used to maximize housing strength and rigidity, so maintaining correct gear alignment and bearing loading. FEM Analysis HIGH TOOTH STRENGTH 25 deg Pressure angle In comparison with ordinary pressure angle (20 deg), 25 deg pressure angle permits a tooth form with thicker dedendum. This translates into higher tooth strength rating, an essential feature for shock load applications. 25 deg Pressure Angle UNIVERSAL HOUSING Horizontal mounting 20 deg Pressure Angle Horizontal, vertical...

Open the catalog to page 4

AVAILABLE COMBINATION Drive Unit: Right Angle Drive Unit: Parallel

Open the catalog to page 5

AVAILABLE COMBINATION Ratio 100 112 125 140 160 180 200 224 250 280 315 355 400 450 18 16 14 13 11 10 9.0 8.0 7.2 6.4 5.7 5.1 4.5 4.0 15 13 12 11 9.4 8.3 7.5 6.7 6.0 5.4 4.8 4.2 3.8 3.3 80 23 19 90 20 17 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 60Hz 50Hz 5.5x4 7.5x4 11x4 15x4 18.5x4 22x4 30x4 37x4 45x4 55x4 O/P speed r/min Motor (kW×P) Ratio...

Open the catalog to page 6

AVAILABLE COMBINATION Table 1. 3-Phase Induction Motors (4 Pole). • : Manufacutured Models Table 2. 3-Phase Induction Motors with Built-in Brakes (4 Pole). • : Manufacutured Models Notes: 1. Motors with output kW specifications other than as listed in Tables 1-4 are also manufactured. Consult factory. Examples: Special voltage, dust-proof, humidity-proof, tropical treatment, high temperature, ship use, dual shaft (round & square shaft), CSA standard, NEMA standard, etc. 2. When using an inverter drive, advice us of ambient temperature, input r/min, mounting method, load characteristics and other...

Open the catalog to page 7

AVAILABLE COMBINATION Table 3. Safety Increased Explosion-proof (eG3) 3-Phase Induction Motor (4 Pole). • : Manufacutured Models Table 4. Pressure-tight Explosion-proof (d2G4) 3-Phase Motor (4 Pole). • : Manufacutured Models

Open the catalog to page 8

INTRODUCTION OF APPLICATION With Motor Common base Double Stack Single stage Drive unit right angle Drive unit parallel Reducer Top mount Steel housing Right angle Mounting Parallel Special slow speed shaft Upright wall mount Upright mount Vertical mount A-8 Drop bearing housing Ceiling mount Hollow shaft

Open the catalog to page 9

All SUMITOMO Drive Technologies America catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list