video corpo

Hansen P4 Multistage (Inch)
86Pages

{{requestButtons}}

Catalog excerpts

Hansen P4 Multistage (Inch) - 1

Sumitomo DriveTechnologies standardized gear units

Open the catalog to page 1
Hansen P4 Multistage (Inch) - 2

Hansen p* Your benefits Power and reliability With the Hansen P4 product line you can easily select what you need , thereby optimizing your investment. Your benefit The excellent constructional rigidity of Hansen P4, together with the commitment to apply state-of-the-art gear technology, leads to remarkable power and performance ■ Specific housings for horizontal and vertical applications ■ Standard higher bearing span for vertical applications ■ Housing and bearing construction in vertical applications designed to take external loads ■ Simple, standard systems for cooling and lubrication ■...

Open the catalog to page 2
Hansen P4 Multistage (Inch) - 3

Hansen pa Your benefits Spare parts, service and maintenance Even the larger Hansen P4 models are easy to transport, manoeuvre and install. Hansen P4 features Your benefit The Hansen P4 is one of the easiest to maintain gear units on the market. The maintenance operation itself has been simplified and shortened ■ Provision for crowbar on smaller housings and adjusting screws on larger housings ■ Oval transport slots for horizontal applications; hoist eyes for vertical applications ■ Standard fixation points for accessories ■ Internal construction ensures oil supply to all bearings on...

Open the catalog to page 3
Hansen P4 Multistage (Inch) - 4

PRODUCT RANGE 1000 Ibf.in Size Center distance 1000 lbf.in A

Open the catalog to page 4
Hansen P4 Multistage (Inch) - 5

PROGRAM Page Motor-reducer D ► H Horizontal applications Right-angle shafts • Cooling Coil • Options • Dipstick & magnetic plug (removal) • Shrink disc connection • Keyed connection Hansen P4 gear unit Motor-reducer C ► H Motor-reducer D ► H Vertical applications Right-angle shafts Cooling Coil Options Rating tables Dimensional drawings

Open the catalog to page 5
Hansen P4 Multistage (Inch) - 6

DESCRIPTION Basic components Helical and spiral bevel gears Designed and rated in accordance with AGMA, ISO for maximum load capacity, minimum losses and quiet operation. The rating tables show the mechanical power ratings P expressed in hp, i.e. the power which the gear unit can transmit during 10h/day, at uniform load, whereby 5 peak torques up to 200% of the nominal torque and lasting not more than 5 seconds each, are allowed. The mechanical power ratings shown in the tables relate respectively to input speeds of 1750, 1460, 1160 and 870 rpm at the high speed shaft. They are also valid...

Open the catalog to page 6
Hansen P4 Multistage (Inch) - 7

Hanseni 1. LOAD Motor power Absorbed power Absorbed torque Running time in h/day Peak torque in excess of 200% Ta Number of starts-stops/per 10 hours Bidirectional load Backstop required 2. SPEED Constant speed | | Constant torque across the speed range Constant power across the speed range High speed shaft (HSS) n1: direction of rotation : Low speed shaft (LSS) 112: direction of rotation : solid LSS : | | ^ cw Electric motor Internal combustion engine: single cylinder multi cylinder Variable speed motor - constant torque - constant hp 4. CONNECTION MOTOR/GEAR UNIT Flexible...

Open the catalog to page 7
Hansen P4 Multistage (Inch) - 8

97QX-00000012Z B SELECTION - Mechanical power rating Procedure Series Q : Hansen P4 Reference Data Program survey in introduction. Type H : Horizontal low speed shaft (or inclined < 45°) V : Vertical low speed shaft Parallel shafts possible? Yes I_^ P : Parallel shafts Application Load conditions Prime mover Actual absorbed power Pa and/or Motor power Pm Size Number of stages Ratio High speed shaft extension L: left U: up R: right C: right-angle Low speed shaft extension L: left U: up R: right D: down Low speed shaft type N: normal solid shaft D: shrink disc hollow shaft K:...

Open the catalog to page 8
Hansen P4 Multistage (Inch) - 9

SELECTION - Thermal rating Reference Data Cooling group size A... factor c for air circulation (without fan)

Open the catalog to page 9
Hansen P4 Multistage (Inch) - 10

GEAR UNIT SPECIFICATION Date : Name : Signature : mot speed (constant) : exact ratio = direction of rotation LSS : Pa = rpm / nLSS = Red. □ □ REFERENCE DATA REFERENCE DATA no extra cooling fan double fan cooling coil (p. A7) cooling system (p. A7) size 1 2 3 4 oil-to-water oil-to-air pressure lubrication backstop required Low speed shaft bearing design for: radial load axial load OPTIONS 1. MOTOR MOUNT : NEMA frame : (If not NEMA, add dimensional drawing) lantern housing adjustable motor platform(M1 - M2 - M3 - M4) scoop (M5 - M6) 2. SHAFTS : mm hollow LSS : bronze bushing 3....

Open the catalog to page 10
Hansen P4 Multistage (Inch) - 11

3h APPLICATION Agitators / Mixers Pure liquids Liquids and solids Liquids variable density Clay working machinery Brick press Briquette machine Compressors Centrifugal Lobe Waterring Reciprocating, multi-cylinder Reciprocating, single-cylinder Conveyors Uniformly loaded or fed Heavy duty Reciprocating, shaking Apron feeder, belt feeder Screw feeder Cranes and hoists * Hoist (non-reversing torque) Light duty Medium duty Heavy duty Travel drive or slewing Peak torque / nom. motor torque 1.5 1.75 2.0 Luffing non-reversing torque reversing torque Boom hoist Elevators Bucket elevator Escalators...

Open the catalog to page 11
Hansen P4 Multistage (Inch) - 12

STANDARDIZED COOLING PROVISIONS 1. Standard fan cooling One or two standard fans are mounted on the high speed shaft. Free air entry at the suction side should be guaranteed. 2. Standard water cooling coil The extra thermal power rating Ptc+ and the connection dimensions as shown in the catalog apply for a cooling system as indicated hereafter: - a standard cooling coil made from copper alloy CuNi10Fe1Mn complying with DIN 17664 and allowing the use of fresh as well as seawater. (Maximum permissible water pressure: 116 psi) - difference between oil bath and cooling water temperature is...

Open the catalog to page 12
Hansen P4 Multistage (Inch) - 13

DETAILED EXAMPLE OF SELECTION Conveyor drive Pa = 72 hp, n2 = 35 rpm Mechanical power rating • Horizontal low speed shaft • Right-angle shafts required - application: see above - load conditions: heavy duty 16h/24h - prime mover: electric motor SF = 1.5 (page A6) Pa x SF = 72 x 1.5 = 108 hp • Ratio: n2 Size and number of stages : mechanical power rating P = check : Pa x SF = 108 hp < P = 11 dimensional drawings on page C1 Right-angle shafts Machine shaft to the right Hollow shaft with shrink disc Second case Operational parameters: . ambient temperature = 105°F : correction factor without...

Open the catalog to page 13

All SUMITOMO Drive Technologies America catalogs and technical brochures

  1. Fine Cyclo

    70 Pages

  2. PARAMAX ® 9000

    281 Pages

  3. ALTAX NEO

    39 Pages

  4. E CYCLO

    28 Pages

  5. IB P2 Catalog

    36 Pages

  6. IB PK1 Catalog

    70 Pages

  7. IB-P1 Catalog

    94 Pages

  8. Servo PPG

    4 Pages

  9. FINE CYCLO

    2 Pages

  10. HF430 Catalog

    31 Pages

  11. SPA Series

    10 Pages

  12. Hedcon catalog

    23 Pages

  13. Servo

    114 Pages

Archived catalogs

  1. IB P1 series

    93 Pages

  2. Fine Cyclo®

    22 Pages