Always air. Always there. Medium Rock Drill

r Pavement Breakers Designed to Work Better and Last Longer High-Wear Parts Reduced Sullair breakers have eliminated most high-wear parts. Fewer parts mean less wear, less maintenance, and less downtime. No Multi-Part Tappet System Unlike conventional breakers, Sullair breakers have no multi-part tappet system. With no tappet system, which requires three independent impacts, noise is reduced. One-Piece, Non-Protrusive Housing A leak-proof air cushion forms at the end of the piston stroke and stops the piston from direct impact when the tool is not breaking. The elimination of side rods, nuts and...

Pavement Breakers Sullair MPB-90A Compared to a Conventional Thor Type Breaker • 30% less parts than conventional breakers - Fewer parts to maintain - Less parts to fail • Direct impact piston - o multi-part tappet system N like conventional breakers • One-piece housing - limination of side rods, E nuts and spring valves

TECHNICAL SPECIFICATIONS Standard T-handle Pavement Breaker Part Number Super-Silenced, Anti-Freeze T-handle Pavement Breaker Part Number Breaker Accessories Part Number WHIP HOSE ASSEMBLY, 8’ x 1/2” ID. 300 psi rated hose 02250152-585 3/8” MNPT air inlet swivel 7/8”-24 male thread inlet swivel x 2-lug universal quick connect WHIP HOSE ASSEMBLY, 6’ x 1/2” ID. 300 psi rated hose (steel hyd. swivel) 02250176-106 3/8” MNPT steel hydraulic swivel w/ 7/8” bushing x 2-lug universal quick connect WHIP HOSE ASSEMBLY WITH 1/6 PT OILER, 8’ x 1/2” ID. 300 psi rated hose 02250174-410

Chipping Hammers Built to Last The Sullair Chipping Hammer is Designed for Rugged Dependability Four Bolt Backhead This unique design reduces handle breakage. The common problem of a threaded handle-to-barrel connection coming loose and damaging the handle and internal parts has been eliminated. D-handle The strong “D” configuration is large enough to allow a comfortable, sure grip, even for a gloved hand. Minimal Lubrication Required Because of the Sullair chipping hammer’s unique design and materials, normal oil carryover from the compressor, combined with moisture in the air, will usually...

TECHNICAL SPECIFICATIONS Chipping Hammer – Standard Oval Return Lock Spring Retainer Model MCH-2 Part Number Chipping Hammer – Screw-0n Ball Retainer (No Springs Required) Model MCH-3S Part Number Chipping Hammer – Retainers and Accessories Part Number REPLACEMENT RETAINERS AND LOCK SPRINGS 68722235 Retainer, for oval collar steel–chrome finish–standard Retainer, for round collar steel w/bumper Rubber bumper replacement for round collar retainer Retainer, universal ball type (spring) Lock Spring, heavy duty Lock Spring, plastic Retainer, universal ball type (screw-on) WHIP HOSE ASSEMBLIES, 8’...

Drills Designed for Performance and Operator Protection Dead Man Safety Handle Sullair drills are designed so that the tool automatically stops operating when the operator releases the throttle lever. Oil Reservoir A built-in oil reservoir assures direct lubrication to rotating parts. Use of standard 90 to 140-weight gear lubricant extends the life of critical parts. One Control for Drilling and Blowing The single throttle lever controls all tool func­ions from t off, to blowing only, to progressive drilling speeds. Simplified Ratchet Design The M-Series Rock Drills are designed to eliminate...

TECHNICAL SPECIFICATIONS Drilling Hammers Model Part Number MRD-9 Accessories Part Number WHIP HOSE ASSEMBLIES, 8’ x 1/2” ID. 300 psi rated hose 02250152-585 3/8” MNPT air inlet swivel WHIP HOSE WITH SWING COUPLING, 8’ x 1/2” ID hose w 1’ whip 02250139-712 3/8” MNPT air inlet with swing coupling x 2-lug universal quick connect MRD-30, MRD-40 & MRD-50 Accessories Part Number WHIP HOSE WITH SWING COUPLING, 8’ x 1/2” ID hose w 1’ whip 02250139-714

Applications Include: • Bridge jobs • Steel structure maintenance • Railroad car repair • Shipyards • Petrochemical plants • Demolition work Interchangeable Parts Provide Flexibility Interchangeable parts (except cylinder) reduce inventory and increase parts versatility. Simplified Control Valve Allows for smoother operation in dirty conditions through precisely engineered tolerances. Lubrication Rivet Busters require inline lubrication. 90-Day Parts Warranty This Sullair warranty covers all tool parts against manufacturing defects. D-handle with Inside Trigger Handle design provides comfort...

MDT-22 and MDT-30 Demolition Tools Two Bolt Backhead This unique design reduces handle breakage. The common problem of a threaded handle-to-barrel connection coming loose and damaging the handle and internal parts is therefore eliminated. D-handle The strong “D” configuration is large enough to provide a comfortable, sure grip even for a gloved hand. Minimal Lubrication Required With its unique design and materials, normal oil carryover from the compressor, combined with moisture in the air, will usually provide sufficient lubrication under normal operating conditions. Stroke Length The piston...

Applications The Sullair MBT-6 backfill tamper is the ideal tool for compacting backfill around utility poles, foundations and other structures. It quickly and efficiently compacts backfill soil excavated to perform service line repair before patching the pavement. Rotatable Exhaust Deflector A durable molded exhaust deflector aims the exhaust away from the operator. Standard Steel 6” Butt A 6" diameter solid steel butt is standard. Optional butts for special applications are available. The butt is held onto the piston rod with a hex head clamp screw for ease of assembly and removal. Smooth Finish Plated...

Part Number Backfill Tamper Butts, like all Sullair accessories, are made specifically for Sullair tools, so proper fit and performance are assured. Our selection includes: (1) 6" Malleable Iron, (2) 6" Steel Butt (standard), (3) 4" Aluminum Butt, (4) Pole Butt Half Moon and (5) 3" Aluminum Butt.