Machining of multiple layer material, composits or stacks

Product catalog summary

Introduction
This document discusses optimal machining techniques for multiple layer materials, composites, or stacks. It emphasizes the need for independent adjustment of spindle speed and feed rate for each material layer to achieve perfect drilling results.

Solutions Offered by SUHNER
SUHNER provides two main solutions for optimal machining of stack materials:

STACKmaster: A portable machining unit designed for flexibility and efficiency in drilling operations.
CNCmaster Series: A range of CNC-controlled machining units for stationary applications in special-purpose machines.

Challenges with Pneumatic Units
Pneumatic drill units have fixed spindle speeds and feed rates, which are coupled together. This inflexibility can lead to material defects, reduced tool life, and longer machining cycle times when working with stack materials.

Advantages of SUHNER Solutions

Fully programmable spindle speeds and feed rates.
Working cycles such as chip braking and peck-feed for efficient chip management.
Significant noise reduction (maximum 65 dBA) compared to pneumatic units.
Integrated minimum quantity lubrication (MQL) system.
Lightweight design starting from 5.5 kg, depending on tool capacity.

Applications
The solutions are applicable in various industries, including aerospace, rail, shipbuilding, and automotive sectors.

Contact Information
SUHNER provides contact details for its offices in Switzerland, Germany, Austria, USA, France, Italy, Mexico, India, and China for further inquiries and support.

Catalog excerpts

Machining of multiple layer material, composits or stacks-1

Optimale Bearbeitung von Mehrschichtmaterialien (Stacks) Optimal machining of multiple layer material, composits or stacks Usinage optimal de materiaux multicouches (Stacks) Ottimizzazione della lavorazione di materiali multistrato (Stacks) SUHtlER, EXPERTS. SINCE 1914.

Open the catalog to page 1

Machining of multiple layer material, composits or stacks-2

Eisenbahnkomponenten | Rail rod components Composants ferroviaires | Componenti ferroviari Bei pneumatischen Einheiten sind Drehzahl und Vorschub fix und miteinander g ekoppelt. So sind bei der Bearbeitung von Stacks Materialbeschädigung, zu kurzen Werkzeugstandzeiten und langen Taktzeiten vorprogrammiert! Pneumatic drill units are fixed in spindle speed and feed rate which are coupled with each other. For the machining of stack materials, this infexibilty leads to material defects, short tool life and longer machining cycle times! Pour les unités pneumatiques, vitesses et avances sont fixes...

Open the catalog to page 2

Machining of multiple layer material, composits or stacks-3

Abdeckungen & Schutzgehäuse | Covers and safety housing Couvercles et boîtiers de protection | Coperture e carter Schiffbau | Shipbuilding Ship yard components Construction navale | Costruzioni navali Karosserieteile | Automotive chassis Eléments de carrosserie | Componenti carrozzeria • Frei programmierbare Spindeldrehzahl und Vorschubgeschwindigkeit • Arbeitszyklen wie Spanbruch und Entspänen ermöglichen kurze Späne • Massiv leisere Bearbeitung (65 dBA max.) im Vergleich zu pneumatischen Einheiten • L-MAX: integrierte Minimalmengenschmierung • Leichtes Gewicht: ab 5,5 kg (abhängig von der Bohrkapazität)...

Open the catalog to page 3

Machining of multiple layer material, composits or stacks-4

MACHINING TRANSMISSION Switzerland Switzerland Switzerland Germany Austria USA France Italy Mexico India China OTTO SUHNER AG SUHNER Automation AG SU-matic AG Otto Suhner GmbH SUHNER SU-matic SUHNER Industrial Products Corp. Somex SAS Suhner SU-matic S.r.l. SUHNER Productos Industriales SUHNER India Pvt. Ltd. Suhner (Suzhou) Ind. Techn. Ltd. Lupfig Lupfig Lupfig Bad Sackingen Wien Rome, GA Ensisheim Zola Predosa San Juan del Rio Bangalore Suzhou [email protected] [email protected] [email protected] [email protected] [email protected] [email protected]...

Open the catalog to page 4

All SUHNER Schweiz AG catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list