Multi Roller Type Superoll SH & SB selection chart (For hole size 035 - 074) Tool model Available burnishing lengt Varies with the set tool diameter Specifying Tool model Tool model No. = Hole size x 100 About the tool weight (Reference only) Tool model *PLease check the allowable tool weight for your driving machine before using the tool. *Please contact us if a specific tool weight is required. About tool selections * Select Tool model within Tool diameter adjustment range A to suit a hole size.* For requests about special burnishing length, tool length or shank specifications not included in the chart above, contact your nearest sales office by using the catalog inquiry sheet, or use the inquiry form on our website. Non-burnishing length (Hole size 035 - 074) Tool model Varies with the set tool diameter Precaution with R0.3 type rollers for Superoll SB type Through-hoLe Blind-hole When using R0.3 type rollers that reduce non-burnishing length of blind-holes, the hole entrance must be chamfered with a C1 or more to prevent interference between the roller tip and workpiece when inserting Superoll SB type. Burnishing conditions (Reference) * Burnishing conditions are reference only, and do not guarantee that they will achieve the customers' required values.* Actual burnishing conditions vary depending on the material and conditions before burnishing, so these values should be used as a reference. suGsno © 2023 SUGINO MACHINE LIMITED www.sugino.com Included details are current as of May 2023. Unauthorized copying or reprinting is prohibited.

Superoll SH & SB selection chart ( For hole size 075 - 0139) Tool model available burnishing lengt Mandrel Stem Varies with the set tool diameter Non-burnishing length (Hole size 075 - 0139) “ Non-burnishing length can be reduced by using R0.3 type rollers. Specifying Tool model Tool model *Please check the allowable tool weight for your driving machine before using the tool. *Please contact us if a specific tool weight is required. Hole size About the tool weight (Reference only) Tool model No. = Hole size x 100 About tool selections Precaution with R0.3 type rollers for Superoll SB type When...

Superoll SH & SB selection chart ( For hole size 0140 - 0200) Hole size 0140 - 0200 Tool model Varies with the set tool diameter Mandrel Stem Non-burnishing area (Hole size 0140 - 0200) * Non-burnishing Length can be reduced by using R0.3 type rollers. Specifying Tool model Tool model No. = Hole size x 100 SH: For through hole SB: For blind hole About the tool weight (Reference only) Tool model Precaution with R0.3 type rollers for Superoll SB type When using R0.3 type rollers that reduce non-burnishing area of blind-holes, the hole entrance must be chamfered with a C1 or more to prevent interference...