Part Name Part Name Part Name (1) Attach Superoll SFP to a driving unit such as machining center or milling center. (2) Set the Z axis of the driving unit correctly so that the amount of rollers compression is appropriate. (3) In the same way as face milling, move Superoll SFP horizontally while rotating it to press a workpiece surface. * Ensure that a workpiece flatness is within 0.02 mm before burnishing with Superoll SFP. * Burnishing is available within the range of Effective burnishing diameter. (Burnishing is not available on the outer side of the Effective burnishing diameter) Burnishing conditions (Reference) * Burnishing conditions are reference only, and do not guarantee that they will achieve the customers' required values. * Actual burnishing conditions vary depending on the material and conditions before burnishing, so these values should be used as a reference. * Please check the allowable tool weight for your driving machine before using the tool. © 2023 SUGINO MACHINE LIMITED www.sugino.com Included details are current as of May 2023. Unauthorized copying or reprinting is prohibited.