* Please set rotation direction of workpiece as shown in above figure. (If using with reversed rotation, diamond tip may be come off.) * Min hole size : 013 * Please set rotation direction of workpiece as shown in above figure. (If using with reversed rotation, diamond tip may be come off.)Tool specification Tool model Burnishing condition (Reference) T ool model * Burnishing conditions are reference only, and do not guarantee that they will achieve the customers' required values. * Actual burnishing conditions vary depending on the material and conditions before burnishing, so these values should be used as a reference. suGsno © 202 1 SUGINO MACHINE LIMITED www.sugino.com Included details are current as of March 2021. Unauthorized copying or reprinting is prohibited.