Multiple axis (concealed) hinges
61Pages

{{requestButtons}}

Catalog excerpts

Multiple axis (concealed) hinges - 1

•Stainless steel (SUS304) arm has sufficient strength and superior corrosion resistance. • R-100 adopts a roller as guide pin, making smooth movement even under high load. •Can be widely used from wooden doors to sheet metal doors. •Torque hinge types also available . DAMPER HINGES LIFT ASSIST HINGES DETENT HINGES f if [Remarks] •Distance to door edge must be less than Xmm. •Roller is supplied to R-100 only. •Recommended for use in pairs. [Parts Included] •Countersunk head wood screw (SUS) •Countersunk head tapping screw (SUS) (R-70 only) CONCEALED HINGES SPRING HINGES CLEAN ROOM HINGES HINGES FOR ALUMINIUM FRAME DROP HINGES GLASS DOOR HINGES SPECIAL HINGES (Reference) When hanging a door with 3 hinges, a large load is applied to the upper hinge, so the middle hinge is preferably set at about 1/2 of the distance from the midpoint of upper and lower hinges to the upper hinge.

Open the catalog to page 1
Multiple axis (concealed) hinges - 2

Passed 40,000 open/ close private cycle test •High corrosion with stainless steel. • For light door. [Remarks] •When increasing the board thickness, be sure to keep the dimensions of ^ marked on bellow drawings and increase the remaining margins on the opposite side. •Recommended for use in pairs. [Parts Included] •Countersunk head wood screw 2.4x13 (SUS) Max. 2*- PIANO HINGES CONCEALED HINGE INO-66 •Stainless steel front plate. [Applications] •Folding door or window, door of built-in furniture, etc. [Remarks] •When using three hinges, install the middle one 200mm below the upper hinge....

Open the catalog to page 2
Multiple axis (concealed) hinges - 3

CONCEALED HINGE HES® SERIES ●Hinge is completely hidden when the door is closed. Original design of the door is maintained with improved security. ●Products with 3-way adjustment function (vertical, horizontal, and depth adjustment) and products with temporary holding feature to for allow easy door installation are available.Refer to list applicable products. was awarded the “Good Design Award 2011” ●HES3D-160 ●Can be used together with a door damper. ・LAPCON DOOR DAMPER LDD-V ・LAPCON DOOR DAMPER LDD-S TORQUE HINGES DAMPER HINGES [Installation and Adjustment Procedure Using Temporary...

Open the catalog to page 3
Multiple axis (concealed) hinges - 4

[HES Concealed Hinge Series Digest] Picture, Item Name Door Width Door Height Door Thickness Door Weight Temporary Holding Feature 3-WAY ADJUSTABLE CONCEALED HINGE HES3D-E190 DAMPER HINGES LIFT ASSIST HINGES DETENT HINGES CONCEALED HINGES 3-WAY ADJUSTABLE CONCEALED HINGE HES3D-160 BUTT HINGES PIANO HINGES 3-WAY ADJUSTABLE CONCEALED HINGE HES3D-120 STEP HINGES LIFTOFF HINGES PIVOT HINGES 3-WAY ADJUSTABLE CONCEALED HINGE HES3D-90 SPRING HINGES CLEAN ROOM HINGES HINGES FOR ALUMINIUM FRAME DROP HINGES GLASS DOOR HINGES SPECIAL HINGES 3-WAY ADJUSTABLE CONCEALED HINGE HES3D-70 3-WAY ADJUSTABLE...

Open the catalog to page 4
Multiple axis (concealed) hinges - 5

3-WAY ADJUSTABLE CONCEALED HINGE HES3D-E190 DAMPER HINGES LIFT ASSIST HINGES DETENT HINGES CONCEALED HINGES BUTT HINGES [Parts Included] Countersunk head tapping screw 5X30 (8 pcs/hinge) SUS • Hex key 4 [Sold Separately] Installation template HES3D-E190-TMP E^ ^ Can be reused, so door and frame can be easily cut out with a router. Figure below shows the state with the upper screw covers removed. Vertical adjustment screw (2 locations) Depth adjustment screw 4x^5,5 ^10,3 / (2 locations) • Max. Door Weight: 100kg with 2 pcs, 125kg with 3 pcs. • Small bore depth for compact assembly. • 3 -way...

Open the catalog to page 5
Multiple axis (concealed) hinges - 6

•Small bore depth for compact assembly. •3 -way adjustment function allows vertical, horizontal, and depth adjustment after hinge installed. • Easy installation: Hinge can be split into the door side and the frame side and has temporary door holding feature. •Awarded the “Good Design Award 2011”. [Remarks] •Can be used with Sugatsune door damper/door closer shown below. Please check and follow product specifications. ■ LAPCON DOOR DAMPER LDD-S ' LAPCON DOOR DAMPER LDD-V ■ LAPCON DOOR CLOSER LDC-N2 • Using with other door closers might lead to hinge damage. • For using Sugatsune door closer,...

Open the catalog to page 6
Multiple axis (concealed) hinges - 7

Passed 300,000 open/ close private cycle test TORQUE HINGES DAMPER HINGES LIFT ASSIST HINGES DETENT HINGES CONCEALED HINGES 3-WAY ADJUSTABLE CONCEALED HINGE HES3D-120 •Small bore depth for compact assembly. •Black colour is newly launched. 3 -way adjustment function allows vertical, horizontal, and depth adjustment after hinge installed. • Easy installation: Hinge can be split into the door side and the frame side and has temporary door holding feature. Order-made colour available. [Remarks] Can be used with Sugatsune door damper/door closer shown below. Please check and follow product...

Open the catalog to page 7
Multiple axis (concealed) hinges - 8

Passed 300,000 open/ close private cycle test •Small HES series can be applied with Min. door thickness of 23mm. •Small bore depth, easy to cut out the door and frame. •3 -way adjustment function allows vertical, horizontal, and depth adjustment after hinge installed. •Hinge can be split into the door side and the frame side. •Order-made colour available. For further details, please contact local representatives. [Remarks] Can not be used with LAPCON DOOR DAMPER LDD [• or LAPCON DOOR CLOSER LDC-N2. •Can be used with DC-200 damper catch but can not be used with lid stays or other door...

Open the catalog to page 8
Multiple axis (concealed) hinges - 9

3-WAY ADJUSTABLE CONCEALED HINGE HES3D-70 DAMPER HINGES LIFT ASSIST HINGES •Small HES series can be applied with Min. door thickness of 19mm. •Small bore depth, easy to cut out the door and frame. •3 -way adjustment function allows vertical, horizontal, and depth adjustment after hinge installed. •Hinge can be split into the door side and the frame side. [Remarks] •Can not be used with LAPCON DOOR DAMPER LDD O or LAPCON DOOR CLOSER LDC-N2. •Use below opening angle 180°. •Can not be used with lid stays or door damper. [Parts Included] •Countersunk head tapping screw 4X20 (4 pcs/hinge) SUS...

Open the catalog to page 9
Multiple axis (concealed) hinges - 10

•Small bore depth for compact assembly. •3 -way adjustment function allows vertical, horizontal, and depth adjustment after hinge installed. • Easy installation: Hinge can be split into the door side and the frame side and has temporary door holding feature. [Remarks] •Our original new link arm mechanism provides different locus from other products MW of the same series. Please confirm the position where the door is opened by 90° on the left figure. •Can be used with Sugatsune door damper/door closer shown below. Please check and follow product specifications. ■ LAPCON DOOR DAMPER LDD-S ■...

Open the catalog to page 10

All SUGATSUNE KOGYO CO. catalogs and technical brochures

  1. NEW hinges

    11 Pages

  2. Other hinges

    65 Pages

  3. Detent hinges

    11 Pages

  4. Damper hinges

    23 Pages

  5. Torque hinges

    32 Pages

  6. VENTILATOR

    1 Pages

  7. Miscellaneous

    72 Pages

  8. Casters

    52 Pages

  9. Locks

    32 Pages

  10. Drawer Slides

    58 Pages

  11. Lid Supports

    126 Pages

  12. DOOR HOLDER

    2 Pages

  13. LID STAY

    2 Pages

  14. VENTILATOR

    2 Pages

  15. PUSH LOCK

    2 Pages