GE Power & Water Water & Process Technologies Fact Sheet Analytical Instruments Sievers InnovOx Laboratory and On-Line TOC Analyzers Overview GE Analytical Instruments designed the Sievers* InnovOx Total Organic Carbon (TOC) Analyzers to provide industryleading sample handling robustness and instrument uptime for process, environmental, and wastewater organic carbon analysis. Available in both Laboratory and On-Line models, the InnovOx uses an innovative Supercritical Water Oxidation technique that offers enhanced reliability, greater ease of use, and lower maintenance than typical combustion or UV persulfate TOC analyzers. L ow Maintenance and Cost of Ownership—Robust by design, the InnovOx requires minimal operator intervention or preventive maintenance, offers up to six months’ calibration stability, and features a solid state nondispersive infrared (NDIR) detector. E thernet Web browser interface (Lab)—Allows users to remotely monitor and control Analyzer operations and results using a Web-based interface via the instrument’s Ethernet port. U ser-configurable alarms and outputs (On-Line)—Notifies user of water system events and enables remote monitoring of analysis results and performance. Features and Benefits W ide Dynamic Operating Range—Measures up to 50,000 parts per million (ppm). V ersatile Measurement Modes—Measures Total Inorganic Carbon (TIC), NPOC, Total Carbon (TC) and TOC by difference (TC-TIC). S ample Handling Robustness—Uses an innovative Supercritical Water Oxidation (SCWO) technique to achieve superior TOC recoveries regardless of organic compounds and particulate impurities in the sample. The InnovOx can handle a wide variety of traditionally difficult sample matrices, including brine, cellulose, and humic acid (see table on page 4) with unprecedented reliability. E asy Operation—The InnovOx On-Line offers preset protocols for easy startup. Both OnLine and Laboratory models have intuitive color touch-screen interfaces, and operate immediately without any necessary heater warm-up or detector stabilization. InnovOx Laboratory TOC Analyzer Web Interface

InnovOx On-Line TOC Analyzer Touch-Screen Interface InnovOx On-Line TOC Analyzer Touch-Screen Interface Supercritical Water Oxidation (SCWO) Using a patented SCWO technique (see sidebar below), the Sievers InnovOx takes the water sample to a supercritical state by increasing the temperature, and subsequently the pressure, within the reactor. The properties of supercritical water enable an ultra-efficient oxidation of TOC to carbon Chlor-alkali Chemistry Environmental Labs Municipal/Industrial Wastewater Brine and Seawater dioxide, even in the presence of chloride and other inorganic species that...

InnovOx On-Line Analyzer Details Accessories and Options Air Purifier The Air Purifier removes CO2 from the air so the Analyzer can use house air as the compressed gas source. Filter Panel This accessory filters one sample stream, and it is automatically cleaned by back flushing with compressed air. The Filter Panel is adjustable for various particulate levels. Fail-Safe Accessory Sensors detect when the flow rate of each sample stream stops or consumables need replenishing. IP56 The IP56 configuration protects the Analyzer from water spray and dust that would interfere with its operation. NEMA 4X...

InnovOx Laboratory Analyzer Details Accessories and Options Air Filter The Air Filter is used to purify ambient air and pressurize it sufficiently for use as sparge and carrier gas. It easily attaches to the back of the Lab model, so the Analyzer can be used in place of external carrier gas cylinders. GE Autosampler For high-volume laboratory applications, the InnovOx can be used with the GE Autosampler. It can handle up to 120 35-mL sample tubes or up to 63 40-mL or 60-mL vials in one protocol. An optional stirring station creates a homogeneous mixture for analysis during the sampling process....