SeaPRO* Series

SeaPRO* Series

SeaPRO* Series

Product catalog summary
Overview: The SeaPRO Series 60 Hz Seawater Desalination Machines are designed for desalinating seawater with a salinity of 35,000 ppm NaCl, offering flow rates between 100-300 gpm (22.7-68.1 m3/hr). The machines are equipped with advanced control systems and are available with basic and premium features.
Basic Features (BAS): Includes a 7-inch color display with touchscreen controls, a GE Fanuc Micro VersaMax processor, and a variable frequency drive for the high-pressure pump. The system is skid-mounted with separate enclosures for control and membrane/energy recovery devices.
Premium Features (PRE): Offers a 12-inch color display with both text and pictorial screens, automated valves for feed flush, and enhanced instrumentation including primary and final pressure transmitters. The system also includes remote I/O capabilities.
Operating Parameters: The system is designed for a maximum recovery of 45% and a nominal rejection rate of 95-98%. It operates within a temperature range of 35 to 85ºF (1.6 to 29.4ºC) and requires a minimum inlet pressure of 30 psig (2 Bar).
Instrumentation: The system includes flow meters for permeate and concentrate, conductivity measurement for permeate, and various pressure sensors. The instrument center is equipped with a Thornton M800.
Materials of Construction: The frame is made of painted carbon steel, with GRP cartridge filter housing and FRP membrane housing. Low and high-pressure pipes are made of Schedule 80 PVC and Duplex 2205, respectively.
Options Available: Additional options include multi-media filters, Clean-in-Place (CIP) units, chemical feed systems, and transfer pumps with storage tanks.
SeaPRO Models: The document details four models (SeaPRO-42, SeaPRO-63, SeaPRO-84, SeaPRO-126) with varying permeate and concentrate rates, pump specifications, and energy recovery booster models.
Installation and Utility Requirements: Each model has specific requirements for inlet, permeate, and concentrate connections, as well as power and control circuit specifications.
Skid Specifications: Dimensions and weight estimates for shipping purposes are provided for both the membrane/ERD skid and the pump/prefilter skid.
See more

Catalog excerpts

SeaPRO* Series-1

Fact Sheet SeaPRO* Series 60 Hz Seawater Desalination Machines 35,000 ppm NaCl 100-300 gpm (22.7-68.1 m3/hr) GE Fanuc Quick Panel 7-inch color display. Primarily text operating screens, Touchscreen controls. GE Fanuc QuickPanel 12-inch color display. Text and pictorial operating screens. Touchscreen controls. GE Fanuc Micro VersaMax processor GE Fanuc VersaMax processor 4-20 mA instruments displayed on instrument center Primary and final pressure transmitters Variable frequency drive (VFD) for high pressure pump Variable frequency drive (VFD) for high pressure pump Motor starter for boost pump Motor starter for boost pump Stand alone master control enclosure, skid mounted local control enclosure with terminal strips Automated valves and control for feed flush upon shut down Membrane/energy recovery device (ERD)/boost pump and HP pump/prefilter located on separate skids Stand alone master control enclosure, local control enclosure with remote I/O Membrane/energy recovery device (ERD)/boost pump and HP pump/prefilter located on separate skids Find a contact near you by visiting www.gewater.com and clicking on “Contact Us”. * Trademark of General Electric Company; may be registered in one or more countries. ©2014, General Electric Company. All rights reserved. FS1017EN.doc Sep-14

 Open the catalog to page 1
SeaPRO* Series-2

Operating Parameters Design Feed TDS Maximum Recovery Nominal Rejection Operating Temperature Minimum Inlet Pressure Design Temperature Frame Cartridge Filter Cartridge Filter Housing Membrane Elements Membrane Housing Low Pressure Pipe High Pressure Pipe Enclosures Painted Carbon Steel RO.Zs 05-40, 5-micron nominal GRP (glass reinforced plastic) AD-400 FRP Schedule 80 PVC Duplex 2205 NEMA 4 Options Available Multi-Media filters Chemical feed systems Transfer pumps and storage tanks Documentation Included Operation and maintenance manual Control narrative Drawings: piping and instrumentation,...

 Open the catalog to page 2
SeaPRO* Series-3

Cartridge Filtration Cartridge Filter: Filter Length: Filter Quantity: Installation and Utility Requirements Inlet: Permeate: Concentrate: Inlet Water Pressure: Air Pressure: Drain to be Sized for: Power: Control Circuit: SeaPRO Skid Membrane/ERD Skid Height: Width: Depth: Weight Estimate for Shipping Purposes: Pump/Prefilter Skid Height: Width: Depth: Weight Estimate for Shipping Purposes: Membranes:

 Open the catalog to page 3

All Suez Water Technology & Solutions catalogs and technical brochures

  1. Tonkaflo

    3  Pages

  2. GenGard

    2  Pages

  3. ZeeWeed 1500

    2  Pages

  4. FoamTrol

    1  Page

  5. Procera

    2  Pages

  6. ED / BPED

    4  Pages

  7. EDR

    3  Pages

  8. BEVPAK series

    3  Pages

  9. PROflex

    5  Pages

  10. PRO E-Cell

    2  Pages

  11. GE BEV Series

    2  Pages

  12. RePAK Series

    2  Pages

  13. DEOX Process

    1  Page

  14. Spectrus

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.