*mydirectindustry

PRO E-Cell

Product catalog summary

Fact Sheet Overview
The document provides detailed specifications and features of the PRO E-Cell Series, which are integrated Reverse Osmosis (RO) and Electrodeionization (EDI) machines designed for water treatment, with capacities ranging from 50 to 200 gallons per minute (gpm) at 60 Hz.

Features

RO and EDI systems are mounted on a common skid.
Models 50 and 100 feature a 2-pass RO design, while models 150 and 200 have a 1-pass RO design.
Includes RO Pump Variable Frequency Drives (VFDs) and EDI DC Drive mounted on the skid.
Equipped with an Allen Bradley control system featuring Compact Logix PLC and PanelView Plus 1000 interface.
UL/cUL certified electrical panel.

Instrumentation

Flow meters for RO Permeate, RO Concentrate, EDI Product, EDI Concentrate, and EDI Electrode.
Pressure gauges and transmitters for various stages of the RO and EDI processes.
pH and optional ORP meters for RO feed monitoring.

Accessories

Includes multi-media filters, activated carbon, softeners, clean-in-place units, chemical feed systems, transfer pumps, and storage tanks.

Operating Parameters

Design recovery rates: RO1 at 75% for Pass 1 and 85% for Pass 2; EDI at 90-95%.
Design temperature is 60ºF (16ºC) with an operating range of 40-85ºF (5-29ºC).
System inlet pressure ranges from 30-60 PSI (2-4 Bar).

Materials of Construction

High-pressure piping made of 316 Stainless Steel, low-pressure RO & EDI piping of PVC.
Frame constructed from epoxy-coated carbon steel.

Membrane Elements and Housings

Models 50-100 use GE AK-400 membranes, while models 150-200 use GE PRO-RO-400-HR-WT.
Membrane rejection rates range from 99.0 to 99.5%.

EDI Stacks

Utilizes GE E-Cell MK-3 stacks with a nominal product flow rate of 16.7 gpm and performance of 16 MOhm-cm.

Cartridge Filtration

Uses GE HX-0740-80-V316 housing with ROSave.Zs and RO.Zs01-40XK cartridge filters.

Installation and Utility Requirements

Various ANSI flange sizes for RO and EDI connections.
Inlet water pressure of 30-60 psig and air pressure of 80 psi, oil-free.
Power requirements include 460 VAC, 3-phase, 60Hz and 120 VAC, 1-phase, 60Hz.

Skid Dimensions and Weights

Dimensions and weights vary by model, with shipping weights ranging from 9050 lb. to 14600 lb. and operating weights from 11150 lb. to 18250 lb.

Catalog excerpts

Fact Sheet PRO E-Cell* Series Integrated RO/EDI Machines 50 to 200 gpm 60 Hz Accessories RO and EDI mounted on common skid PRO E-Cell* 50 and 100 are 2 pass RO designs PRO E-Cell 150 and 200 are 1 pass RO designs RO Pump VFD(s) and EDI DC Drive mounted on skid RO permeate flush sequence on shutdown and divert to drain on startup Allen Bradley control system with Compact Logix PLC and PanelView Plus 1000 interface UL/cUL Electrical Panel PRO Multi-Media filters PRO Activated Carbon and Softeners PRO Clean-in-Place units PRO Chemical Feed Systems Transfer Pumps and Storage Tanks Find a contact near you by visiting www.gewater.com and clicking on “Contact Us”. * Trademark of General Electric Company; may be registered in one or more countries. ©2013, General Electric Company. All rights reserved. AM-FSroPRO_E-Cell_EN.doc Sep-13

Open the catalog to page 1

Cartridge Filtration PRO E-Cell Models MODEL RO Permeate Rate2: RO Concentrate Rate: Concentrate Recycle: RO Feed Rate: EDI Product Rate: EDI Concentrate Rate (max): EDI Electrode Rate: Pumps and Motors Model: Manufacturer: Quantity: Motor Power and type: Installed Power: Membrane Quantity: Memb. Housing Style: Banking Arrangement: Stack Model : Stack Quantity: Power (DC drive, 300 VDC): Housing Model: Housing Quantity: Cartridge Filter Model: Cartridge Filter Length: Cartridge Filter Qty: RO Inlet: RO Reject to Drain: RO Product Dump: EDI Product Outlet: EDI Product Dump: EDI Concentrate Outlet:...

Open the catalog to page 2

PRO E-Cell

PRO E-Cell

Catalog excerpts

All Suez Water Technology & Solutions catalogs and technical brochures

Archived catalogs