*mydirectindustry

PRO AP Series 50 Hz

Product catalog summary

Fact Sheet Overview
The document provides detailed specifications and features of the PRO AP Series 50 Hz Reverse Osmosis Machines, which have capacities ranging from 11 to 102 m3/hr.

Basic Features

Designed for 1000 mg/L feed TDS and 20°C water temperature.
Equipped with GE Intelligent Platforms' VersaMax Micro PLC and a 6-inch QuickPanel monochrome touchscreen.
Utilizes Xylem SV high-pressure pumps and supports RS232/DH485 communication.
Instrumentation includes flow meters, conductivity, and pressure measurements.

Materials of Construction

High-pressure piping: 316 SS, Sch. 10.
Low-pressure piping: PVC, Sch. 80.
Frame: Painted blue carbon steel.
Enclosure: IP54 rated, painted carbon steel.

Options Available

Premium controls and instrument package.
Additional pH and ORP sensors.
Skid mounted motor starter (Wye-Delta).
High Rejection Membrane Elements and PRO Clean-in-Place units.

Operating Parameters

Design recovery: 75% with a nominal rejection rate of 97-99%.
Operating temperature range: 2 to 30°C.
Design inlet pressure: 2-4 bar.

Membrane Elements and Housings

Membrane model: AG8040F, spiral-wound elements, manufactured by GE.
Membrane type: TFC (Polyamide) with a rejection rate of 99.0-99.6%.
Housing material: FRP, manufactured by Wave Cyber or equivalent.

Cartridge Filtration

Housing model: 7 Rounds, 102cm (40”) made of 316 SS.
Cartridge filter: 1-micron nominal, ROsave.Z*s.

Model Specifications

Models range from PRO-11-AP-50 to PRO-102-AP-50 with varying permeate, concentrate, and feed rates.
Pumps and motors are manufactured by Xylem with different models and power ratings.

Installation and Utility Requirements

Inlet, permeate, and concentrate connections are ANSI flanges with specific pressure requirements.
Power requirements: 380 VAC, 3-phase, 50Hz and 220 VAC, 1-phase, 50Hz.

Skid Dimensions and Weight

Dimensions and shipping weights vary by model, with the largest model having a height of 2475 mm, width of 1850 mm, depth of 7080 mm, and weight of 6124 kg.

Catalog excerpts

Fact Sheet PRO AP Series 50 Hz Reverse Osmosis Machines from 11 to 102 m3/hr Instrumentation Flow Meters Conductivity Pressure Permeate, concentrate Permeate Pre-filter, post-filter, primary, final, permeate, concentrate, pump discharge Feed, permeate, concentrate Feed Feed Signet 8900 Pressure Switch pH (Optional) ORP (Optional) Instrument Center Options Available Basic Features Premium controls and instrument package pH and ORP sensors added to Basic package Skid mounted motor starter (Wye-Delta) added to basic package High Rejection Membrane Elements PRO Clean-in-Place units Allen Bradley PLC and HMI packages Grundfos CRN high pressure pump(s) 1000 mg/L feed TDS and 20C water temperature design GE Intelligent Platforms' VersaMax Micro PLC with 6-inch QuickPanel monochrome touchscreen. Xylem SV high pressure pump 4-20 mA instrument display on instrument center Documentation Included Materials of Construction High-pressure piping Low-pressure piping Frame Enclosure 316 SS, Sch. 10 PVC, Sch. 80 Painted blue carbon steel IP54 (painted carbon steel) Operation and maintenance manual Drawings: piping and instrumentation, electrical and general dimension Operating Parameters Design Recovery1 Design temp. Operating range Nominal rejection Design inlet pressure 1 Recovery Rate can vary +/- 5% Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”. * Trademark of General Electric Company; may be registered in one or more countries. ©2013, General Electric Company. All rights reserved. AP-FSpwPRO_AP_Series_50Hz_EN.doc

Open the catalog to page 1

Membrane Elements and Housings Cartridge Filtration Membrane model Style Membrane manufacturer Membrane type Average membrane flux1 Membrane rejection Housing manufacturer Housing material Housing model Housing material Cartridge filter AG8040F Spiral-wound elements GE TFC (Polyamide) 28 lmh (16.4 gfd) 99.0-99.6% Wave Cyber or Equal FRP Flux can be reduced to 25.5 lmh (15 gfd) by using 400sqft elements. Rated flow can be further reduced by up to 20%. GE PRO-AP 50hz Models MODEL Permeate rate: 2 Concentrate Rate: Feed Rate: Pumps and Motors Manufacturer: Model Quantity: Motor HP: Design Flow Rate:...

Open the catalog to page 2

PRO AP Series 50 Hz

PRO AP Series 50 Hz

Catalog excerpts

All Suez Water Technology & Solutions catalogs and technical brochures

Archived catalogs