Catalogs >
Suez Water Technology & Solutions >
Depth Filter Cartridges

Depth Filter Cartridges
2Pages

Catalog excerpts

Fact Sheet ZCore Depth Filters Featuring patented Z.Plex* Technology Figure 1: ZCore using Z.Plex Technology Benefits: • Greater contaminant capacity compared to filters with equivalent removal efficiency (Note: 90% removal efficiency at rating using ASTM F-795 Retention based on GE efficiency test protocol) • High Temperature Capability (see Table 3) • Melt-bonded exterior ensures no media migration and helps prevent premature surface blinding • Provides lower total cost of filtration operations • FDA compliant • Product meets criteria for USP Class VI • High strength polypropylene core • Resists contaminant unloading even at high differential pressures Typical Applications ZCore is manufactured using patented Z.Plex* filter technology and is engineered specifically for high strength filtration. (See Figure 1) The patented filter matrix of the ZCore provides unmatched performance in these applications. The ZCore filter composition incorporates small diameter fibers and an innovative 3-dimensional fiber matrix. The filter matrix maintains structural integrity while greatly increasing the filter’s particle holding capacity and reducing pressure drop. An additional polypropylene support core enhances strength and temperature resistance. This unique construction allows for excellent removal efficiency, high contaminant capacity and long life. Elevated temperature uses such as hotwater sanitizing in food and beverage processes, process and chemical streams High viscosity fluids that require filter strength under heavy loading and high pressure conditions Applications that experience high pressure drop General Properties Tables 1, 2, 3 and 4 provide information on dimensions and flow performance. Table 1: Materials of Construction Core Media Adapters Polypropylene Polypropylene Polypropylene Table 2: Nominal Outside Diameter 0.5, 1.0, 3.0 micron 5.0 to 200 micron Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”. * Trademark of General Electric Company; may be registered in one or more countries. ©2012, General Electric Company. All rights reserved. FSfilZCore_EN.doc Oct-12

Open the catalog to page 1

Table 3: Operational Limits Maximum forward differential pressure If you are ordering ZCore filters with standard ends (with no adapter on either end), select one designation from each of the first three columns. Your Product Order Number will look like this: ZCore 05-40. If you are ordering ZCore with end adapters, select designations from all applicable columns. Your Product Order Number will look like this: ZCore 05-40 XK. Maximum recommended change-out pressure ZCore cartridge filters may be autoclaved for 30 minutes at 250°F (121°C) under no end load conditions. The autoclaved...

Open the catalog to page 2