STERILIZATION DEVICES
8Pages

STERILIZATION DEVICES Water and Energy Saving Systems Water & EnergyEfficient Technology Save Water and Energy, Save Environment

About Us Sümer A.Ş. was established in 1981 in Ankara to prove services in the medical device sector. It has aimed advancement since the day of its establishment by also taking growth and compliance with the contemporary technologies and protecting the environmental conditions. Our manufacturing takes place in an area of 25.000 m2 in Ankara Organized Industrial Zone. Our Firm is following the innovations in its sector and in abroad through its research and development unit and its application staff with a strong infrastructure of engineers, and is continuing to produce devices it had...

Our Vision To make the Sümer brand a global brand to make our Firm remembered first in the sector. Our Mission Our main task is to create designs with competition power in the global sense by taking the priorities of the sector into consideration and being respectful to the environment and people and giving the first priority to the wishes and expectations of customers, and also to produce innovative technological medical products by meeting all the national and international legal requirements. We are bound up with the Medical Ethical Rules, We are people-oriented, We respect environment,...

Water- Efficient Technology Most modern autoclaves utilize a large amount of water in order to reduce the discharge temperature to drain and comply with local building codes. The Sumer Water- Efficient Technology has been developed to drastically reduce the water consumed by the autoclave. electricity. Water- Efficient Technology can be installed on new sterilizers or retrofitted onto existing sterilizers. Water Use Reduction Strategies: Technology is available to retrofit existing sterilizers to reduce water consumption. The sections below focus on water efficient retrofits, as well as...

Water- Efficient Technology • For the vacuum creation process in dynamic air removal discussed previously, three main options are available for increasing water efficiency (these measures only apply to sterilizers that use dynamic air removal): 1) Liquid Ring Vacuum Pump Replacing the steam sterilizer’s water ejector with a liquid ring vacuum pump (for vacuum creation) can greatly reduce water consumption during the pre-vacuum and dry cycles. The liquid ring vacuum pump eliminates the need to have water flowing through the ejector and directly to the sewer; water used to create a vacuum can...

Water- Efficient Technology 2) Second Water Ejector with a Reservoir and Pump If a sterilizer uses a water ejector to create vacuum, some of the water passing through the ejector can be captured and reused via installation of a second water ejector with a reservoir and pump. Water from the ejector can be captured in the added reservoir and allowed to cool through ambient air circulation, the addition of cold domestic water, or use of a heat exchanger. The water can then be reused for vacuum creation. This method reduces water use for sterilizer vacuum creation by approximately 50 percent....

Address Phone Fax E-mail