Catalogs >
SUCO Robert Scheuffele GmbH & Co. KG >
T.5 Digital Pressure Transmitter Hex22 CANopen / CAN J1939

T.5 Digital Pressure Transmitter Hex22 CANopen / CAN J1939
4Pages

Catalog excerpts

T.5 Digital Pressure Transmitter Hex22 CANopen / CAN J1939 - 1

Digital Pressure Transmitter with CANopen / CAN J1939 Interface Type 0630: CANopen protocol according to CiA DS-301, Device profile according to CiA DS-404 Type 0631: CAN J1939 protocol according to SAE J1939 Robust stainless steel construction with high reliability, even in very rough environments Completely welded measuring cell made of stainless steel 1.4542 / AISI 630 ensures excellent media compatibility 1) Measuring ranges from 0 - 1 bar to 0 - 600 bar excludes pressure range from 0 - 1 bar consisting of completely welded oil-filled measuring cell made of stainless steel 1.4404 / AIS

Open the catalog to page 1

T.5 Digital Pressure Transmitter Hex22 CANopen / CAN J1939 - 2

Digital Pressure Transmitter with CANopen / CAN J1939 I nterface Technical datails 1) Further information and the standard setting can be found in the Technical Documentation CANopen (1-6-30-628-058) and CAN J1939 (1-6-30-628-059) on our homepage at: https://www.suco.de/en/downloads. 2) The EDS (Electronic Data Sheet) of our CANopen device can be downloaded from our homepage at: https://www.suco.de/en/downloads. 3) Static pressure. Dynamic value is 30% to 50% lower. Values refer to the hydraulic/pneumatic part of the pressure transmitter. 4) Including non-linearity, hysteresis,...

Open the catalog to page 2

T.5 Digital Pressure Transmitter Hex22 CANopen / CAN J1939 - 3

0630 / 0631 Electrical connectors and threads

Open the catalog to page 3

T.5 Digital Pressure Transmitter Hex22 CANopen / CAN J1939 - 4

Article matrix for digital pressure transmitters T.5 hex 22 stainless steel CAN bus technology Pressure connection Electrical connection 1) The proprietary PGN and SPN of the respective pressure range can be found in the Technical Documentation CAN J1939 (1-6-30-628-059) on our homepage at: https://www.suco.de/en/downloads. 2) The respective overpressure and burst pressure values of the individual pressure ranges (in bar and PSI) can be found in the .Technical data' on page 161. 3) The pressure unit (bar or PSI) must correspond to the selected pressure range (in bar or PSI).

Open the catalog to page 4