Ready-wired pressure switches hex 24 / hex 27 w w w.suco.de Customized finishing RoHS compliant Technical explanations Connector types with different cable lengths according to customer needs for all switches of the hex 24 and hex 27 series. Our pressure switches mostly have a degree of protection IP65. This may not be adequate for all Degree of protection according to the connector specification of the manufacturer. SUCO is able to ready-wire all commercially available connectors attaching customized cable leng- Adjustable switching points that maintain their setting. standard types. Differences in the technical data will be agreed with the customer and defined on 0240 / 0241 also adjustable even after sealing. Factory pre-set pressure switching points are embossed on the switch body. 38 applications. Especially for commercial vehicles, mobile hydraulics and similar applications where IP67 or IP6K9K may be required. Ready-wired switches offer a maximum of protection against dust and water. This allows that the pressure switch itself can be used in any possible assembly position while the electrical connection can be transfered to climate-wise uncritical and vibration-free places. thes. This not only ensures a great deal of flexibility but also the possibility to supply small quantities without claiming expensive tooling costs. The technical data of ready-wired pressure switch types are substantially the same as those of the a customer-specific drawing of the ready-wired pressure switch.

Ready-wired pressure switches hex 24 / hex 27 Customized finishing w w w.suco.de Many pressure switches series of hex series 24 and 27 can be individually wired according to customer needs. Let us advise you. Standard ranges suitable for ready-wiring SUCO has developed special solutions of pressure switches for pneumatic and gaseous applications. Please ask for individual technical advice with regard to your special application. 0163 / 0166 0164 0167 0169 0168 0170 / 0171 0180 / 0181 0190 / 0191 0196 / 0197 0140 / 0141 See pages 16 bis 25 for technical data See pages 16 / 17 and 22 for technical...

0240/0241 w w w.suco.de RoHS compliant Diaphragm / piston pressure switch With changeover switch and silver contacts Switching point can be adjusted after potting, degree of protection IP67 Depending on connection, suitable for 42 V or 250 V CE marking SUCO pressure switches rated with an operating limit of 250 V are covered by the Low Voltage Directive 73/23/EC. An EC Declaration of Conformity has been issued for these pressure switches and is on file at our offices. The corresponding switches bear the CE mark in our catalogue. Technical data Degree of protection type IP67 The type approval...

0240/0241 Diaphragm / piston pressure switches w w w.suco.de Made of zinc-plated steel (Cr VI-free) RoHS compliant Overpressure safe to 300 / 600 bar1) Switching point adjustable during operation Safety class 2, safety insulation pmax. in bar Adjustment range in bar Tolerance at room temperature With male thread Thread Order number: ± 0.2 G 1⁄4 NPT 1/8 NPT 1⁄4 7/16-20 UNF 9/16-18 UNF 024 0 024 0 024 0 024 0 024 0 457 457 457 457 457 03 04 09 20 21 X X X X X 0 03 30 0 305 310 315 ± 0.5 G 1⁄4 NPT 1/8 NPT 1⁄4 7/16-20 UNF 9/16-18 UNF 024 0 024 0 024 0 024 0 024 0 458 458 458 458 458 03 04 09 20 21...