0530/0531/0532/0533 Electronic pressure switches The pressure switches shown in this brochure are only part of our full product range High overpressure safety for use in mobile hydraulics High durability even with high pressure ramp rates Wetted parts made of stainless steel and titanium to ensure high medium compatibility Silicon-on-Sapphire technology (SoS) for highest accuracy, reliability and safe process monitoring Different output and switching functions for a wide range of applications High output current up to 700 mA Customized versions on request Switching point and hysteresis are set in factory only

Electrical and mechanical connection M 12 – DIN EN 61076-2-101 A x ~ 60 mm (without connector) x ~ 76 mm (with connector) Cable connection IP67 x ~ 44 mm (+ 20 mm bend relief) length of cable ~ 2 m Viton® gasket

0530/0531/0532/0533 Order matrix for electronic pressure switches Type Pressure range Pressure connection w w w.suco.de Unit of switch point Electrical connection Pressure range Socket device M 12x1 straight PNP-Output (High Side), normally open (NO) PNP-Output (High Side), normally closed (NC) NPN-Output (Low Side), normally open (NO) NPN-Output (Low Side), normally closed (NC) Socket device M 12x1 angular Ø 20 Unit of switch point bar Electrical connection Cable (standard length of cable 2 m) Order number: DIN EN 175301-803-A (DIN 43 650-A) Socket device included For ordering, switching point...

Technical data RoHS konform SUCO electronic pressure switches are covered by the EMC-directive 2004/108/EC. An EC Declaration of Conformity has been issued for these electronic pressure switches and is on file at our offices. The corresponding transmitters bear the CE mark in our catalogue. Type Transistor outputs: 1 PNP-Output 1 NPN-Output (High Side N-channel MOSFET) (Low Side N-channel MOSFET) normally open Switch function: Supply voltage: Switching point adjustment range: normally closed normally open normally closed 8 … 32 VDC 2 … 100 % full switching point range, factory programmable 0.2...