Pallet Fixtures, Tooling Plates & Large Angle Plates

Tombstone fixtures with standard 5/8 t-slots provide for quick and easy set-ups. Made from one-piece, class 40 cast iron that has been stress-relieved. Base and sides milled flat, square & parallel to 0.001" in 12". DIN mounting standard, JIS mounting optional. All have drilled and tapped lifting holes in the top surface and coolant drain holes at the base of the column. T-slot spacing in 5" pattern for standard mounting of most workholding devices. A large number of standard size castings in stock. Other materials available on request.

• Tombstone fixtures provide an accurate base for mounting tooling and fixture plates. • Allows for front and back machining of parts. • Made from one-piece, class 40 cast iron that has been stress-relieved. • DIN mounting standard, JIS mounting optional. • Base and sides milled flat, parallel, and square to 0.001" in 12". • A large number of standard size castings in stock. • Other materials available on request.

• Tombstone fixtures with 6 accurate mounting surfaces, for an easy way to increase production. Made from one-piece, class 40 cast iron. Base and sides milled flat, parallel & square to 0.001" in 12". DIN mounting standard, JIS mounting optional. All have drilled and tapped lifting holes in the top surface and coolant drain holes at the base of the column. Available standard as plain milled or custom made with your own hole pattern. A large number of standard size castings in stock. Other materials available on request.

Tombstone fixtures with 8 mounting surfaces are ideal for high part volume applications. Made from one-piece, stress-relieved, class 40 cast iron. Base and sides milled flat, parallel, and square to 0.001" in 12". DIN mounting standard, JIS mounting optional. All have drilled and tapped lifting holes in the top surface and coolant drain holes at the base of the column. Available standard as plain milled or custom made with your own hole pattern. A large number of standard size castings in stock. Other materials available on request.

You may require pallet fixtures in sizes or shapes that are not listed in this catalog. We can supply custom built tools to help you with your production needs. This worksheet is for specifying a custom order pallet fixture. You’ll find it useful for taking the proper measurements and having the information at hand, when requesting a quote on a special pallet fixture. Using the labeled dimensions in the diagrams on the following pages, make a copy of this page and fill in the table with the type of column required and the appropriate dimensions for your custom order fixture. Use the “notes” area...

CUSTOM PALLET FIXTURES

CUSTOM PALLET FIXTURES T-SLOT TYPE WINDOW TYPE SQUARE TYPE 17/32 THRU 23/32 (4) Email: [email protected]

RECTANGULAR TYPE

• Plain tooling / riser plates provide a convenient base for custom workholding solutions. • Made from class 40 cast iron, stress-relieved and annealed. • Top and bottom flat & parallel within 0.001” per 12”. • Available standard as plain ground or custom made with your own hole pattern. • A large number of standard size castings in stock. • Other materials available on request. SQUARE TOOLING PLATES

"G" DRILL & C'BORE—i FOR S.H.C.S. (5) SXpooooS CUSTOM TOOLING PLATES 0"H" THRU (FOR CENTER LOCATION) \0"I" THRU (FOR CLOCKING) oooo\ OOOQ? OOOOOO