857045
2Pages

Catalog excerpts

Sturtevant Richmont Global Reach. Local Support. 555 Kimberly Drive Carol Stream, IL 60188 Phones: 847/455-8677 800/877-1347 Fax: 847/455-0347 E-Mail: CustomerService@srtorque.com Website: www.srtorque.com Operating Instructions Preset Torque Wrenches - LTC/LTCR/LTCS Series Sturtevant Richmont preset torque wrenches are designed and manufactured to provide consistent user-selectable torque in high-cycle applications. They meet ASME B107.14 and ISO 6789 specifications of ± 4% indicated Value accuracy from 20% to 100% of tool capacity. The ratcheting and square drive tools (SDR & SD Series) operate and deliver torque in the clockwise (CW) direction only, as shown by the arrow on the case. The wrench can be used in the counter-clockwise (CCW) direction within the capacity of the tool, but will not indicate torque. The interchangeable head tools (LTC Series) may be used in either direction with the same accuracy by removing the head and mounting it in the opposite direction. S/R preset torque wrenches signal that the preset torque has been attained by emitting a distinct audible and tactile impluse (click). Preset torque wrenches do not have increments and must be set using a torque tester. These wrenches can be set using any unit of torque measurement. CART Tool for presetting torque.

Open the catalog to page 1

Caution >> Always wear safety glasses when working with hand tools. >> Be sure fastener engagement device fully engages fastener before applying torque. >> Cheater bars should never be used to increase leverage on the torque wrench. >> Never use a torque wrench beyond its rated capacity. >> Use tool only for purpose intended. Torque Setting Required Equipment 1. Torque tester accurate to ± 1% Indicated Value accuracy or greater. 2. S/R CART tool P/N 819117. Procedure 1. Insert CART tool into rear of wrench so that the Adjusting Key engages the Adjusting Plug and the Locking Key engages the...

Open the catalog to page 2