*mydirectindustry

850234

Product catalog summary

Overview: This document provides a salable parts list for the 'M' Series Flat Beam Torque Wrenches by Sturtevant Richmont, a division of Ryeson Corp. It includes contact information and guidelines for part replacement.

Contact Information: Sturtevant Richmont is located at 555 Kimberly Avenue, Carol Stream, IL 60188. They can be contacted via phone at 847/455-8677 or 800/877-1347, fax at 847/455-0347, email at [email protected], and their website is www.srtorque.com.

Parts Replacement Guidelines:

Not all parts for the M series torque wrenches are available for sale due to their unique nature.
Only a limited number of parts can be replaced without returning the tool to the factory.
Care must be taken not to damage or scratch the scale when replacing memory fingers and/or memory track.
The handle must pivot freely during operation to ensure accuracy.

Parts List: The document lists all salable parts for each model of the M series torque wrenches. It includes part numbers for components such as the track, rivet, memory track, memory fingers, pivot pin handle, handle stop rivet, and hammer assembly. Not all models use a handle stop and hammer assembly.

Key Models and Parts:

Models range from M 10 I to M 1800 I, with varying part numbers for components.
Some models like M 200, M 300, and M 600 R include additional parts such as handle stop rivet and hammer assembly.

Conclusion: This document serves as a reference for identifying and ordering replacement parts for the M series torque wrenches, ensuring proper maintenance and operation of the tools.

Catalog excerpts

Sturtevant Richmont Sturtevant Richmont Div. of Ryeson Corp. 555 Kimberly Avenue Carol Stream, IL 60188 Phones: 847/455-8677 800/877-1347 Fax: 847/455-0347 E-mail: [email protected] Website: www.srtorque.com Salable Parts List for “M” Series Flat Beam Torque Wrenches Sturtevant Richmont does not sell all parts for M series at beam torque wrenches due to the unique nature of these tools. There are a limited number of parts that can be replaced without returning the tool to the factory for repair. Notes 1. When replacing memory ngers and/or memory track, care must be taken not to damage or scratch scale. 2. When replacing the handle or related components the handle must pivot freely when in operation or the wrench will be inaccurate. This diagram is intended as a guide to the nomenclature for and location of the parts. The large plastic handle is depicted in the drawing; smaller tools use a ball handle (not depicted) and larger tools use a steel handle similar in shape to the one depicted in the diagram. The parts number tables contain the correct handle part number for the tool.

Open the catalog to page 1