*mydirectindustry

uniLoad

Product catalog summary

Overview: The document provides detailed specifications and features of the STUDER uniLoad, a standard automation solution for universal external cylindrical grinding machines, specifically the S31 and S33 models.

Specifications:

Machine Compatibility: S31 and S33 with center distances of 650 mm (25.6") and 1000 mm (39.4").
Part Range: Suitable for shaft and chuck parts.
Workpiece Dimensions: Shaft parts up to 650 mm (25.6") in length and 100 mm (3.94") in diameter; chuck parts up to 100 mm (3.94") in length and 260 mm (10.2") in diameter.
Gripping Diameter: Shaft parts: 6 mm (0.24") to 100 mm (3.94"); chuck parts: 6 mm (0.24") to 260 mm (10.2").
Part Weight: Maximum 5 kg (11 lbs) in alternating operation; 15 kg (33 lbs) with single gripper.
Changeover Time: 10–12 seconds in alternating operation; 18 seconds with single gripper.
Reprovisioning Time: 7 seconds.

Features:

Automation: Forward-looking setup assistant for quick and easy setup, with changeover in less than 15 minutes.
Workpiece Supply: Standardized pallet solution.
Control Interface: Operated via a Siemens 9" screen with an intuitive user interface.
Construction: Basic frame with enclosure and setup door, portal beam with single or dual gripper, pallet/conveyor belt, and SPC/NIO output.
Footprint: Width: 2650 mm (104"), Length: 1600 mm (63").

Additional Information: The system is expandable to meet future needs and requires no programming knowledge. It is designed for safe and clean operation with a loading hatch as standard.

Catalog excerpts

■ Standard automation for large parts ■ Forward-looking setup assistant for quick and easy setup ■ Quick setup and changeover in less than 15 minutes ■ Workpiece supply via standardized pallet solution ■ No programming knowledge required ■ Expandable to meet your future needs The Art of Grinding. A member of UNITED MACHINING SOLUTIONS

Open the catalog to page 1

For machine types S31 and S33 with center distances of 650 mm (25.6") and 1000 mm (39.4"), a loading solution based on a linear portal cell with two parallel grippers is offered. The loading system is suitable for shafts up to a part length of 650 mm (25.6"), a part diameter of max. 260 mm (10.2"), and for chuck parts up to a part length of 100 mm (3.94") and a part diameter of max. 100 mm (3.94"). The loading system thus covers a large spectrum of the parts manufactured on these machines. Parts are supplied via a standardized pallet system. The base module’s enclosure, which is adapted to the...

Open the catalog to page 2

uniLoad

uniLoad

Catalog excerpts

All STUDER catalogs and technical brochures

Archived catalogs