StuderControl

Product catalog summary

Overview
The document discusses the automatic control measurements available on Studer grinding machines, focusing on three main tools: TouchPositioning, TouchControl, and Multi-Control. These tools enhance productivity by allowing workpieces to be controlled directly on the machine, with results recorded and corrections made to the control system.

TouchPositioning
This feature is applicable to both external and internal grinding machines. It involves the use of a touch probe that can be positioned perpendicular or parallel to the workpiece axis and machining plane. The configuration varies based on the machine type and the specific requirements of the grinding process.

TouchControl
TouchControl requires TouchPositioning and a touch probe parallel to the machining plane. It offers flexible diameter and length control measurements, calculates dimensional deviations, logs post-process control data, and includes a programmable cycle for automatic calibration. It is compatible with machines using the StuderWIN and StuderSIM operating systems.

Probe Configurations
There are four probe configurations (A, B, C, D) designed for different workpiece diameters, ranging from up to 70 mm to 340 mm. Each configuration supports various functions such as length positioning, circumferential positioning, and diameter measurements.

Multi-Control
This tool is used for post-process control measurements and includes active positioning functions. It requires specific machine configurations and supports functions like length and circumferential positioning, flexible diameter and length control measurements, and cylindricity control. The probe configuration can be easily converted by the operator.

Additional Features
Both TouchControl and Multi-Control offer additional features such as calculation of dimensional deviations, logging of control data, and automatic calibration cycles. The MultiControl touch probe can also be used for QuickSet.

Certifications
The document notes that the systems are ISO 9001 and VDA6.4 certified, ensuring quality and reliability.

Contact Information
Fritz Studer AG, located in Thun, Switzerland, provides contact details for further inquiries.

Catalog excerpts

AUTOMATIC CONTROL MEASUREMENTS DIRECTLY ON THE MACHINE With TouchPositioning, TouchControl and Multi-Control STUDER offers three tools for increasing productivity. Workpieces are controlled directly on the machine, the results are recorded and corrections are transferred to the control system. A member of the UNITED GRINDING Group

Open the catalog to page 1

TOUCHPOSITIONING Prerequisite: Machine with a touch probe. Length positioning for the correction of deviations in the Z-direction (e.g. due to different centerdepths). Circumferential positioning for circumferential positioning of the workpiece or determination of a contour. For machines with a touch probe parallel to the machining plane. Length control measurement For machines with StuderSIM operating system. External grinding machines Touch probe perpendicular to the workpiece axis and at an angle or parallel to the machining plane. At an angle to the machining plane Parallel to the machining...

Open the catalog to page 2

MULTICONTROL For post-process control measurements including active positioning functions. Prerequisite: S33 with external grinding wheel in tool position T2 right and workhead MT4 or ISO50. The following functions are possible, depending on the probe configuration: Length positioning for the correction of deviations in the Z-direction (e.g. due to different centers). Circumferential positioning for circumferential positioning of the workpiece. Flexible external or internal diameter and length control measurement Cylindricity control measurement Probe configuration A for workpiece dia. up to...

Open the catalog to page 3