Residential solutions Get the maximum out of your renewable energy system swiss made power

Get the maximum out of your renewable energy system For grid connected systems, adding battery storage provides a back-up energy source in the case of grid failure. The Studer standard application maintains the battery fully charged and supplies loads using solar and grid energy. If grid injection is authorized, excess solar energy is exported to the grid. Otherwise, with standard settings, excess solar energy is not used. Tenerife, Spain Renewable energy in priority Santiago, Chile Renewable profile With the self-consumption application, the Xtender system allows the battery to be discharged...

Mayens sur Conthey, Switzerland VarioTrack Series Saint-Barthélemy, France Xtender Series In order to give priority to consumption of the energy generated from your own solar or renewable installation, different systems including the Xtender inverter/ chargers can be set up. These systems store excess energy produced during daytime in batteries to be used at a later time, maximizing self-consumption. The public grid will only be used to import or export small amounts of energy if absolutely necessary.

Adding solar to your installation DC-coupling Studer proposes to use our Vario series solar charge controllers (Variotrack or Variostring) to add solar power into your installation. The Vario solar charge controller is connected to the battery ensuring the maximum available power from the solar PV modules is delivered to the batteries. As part of an Xtender system, the Vario solar charge controller is connected to the battery in the same DC-bus as the Xtender inverter, working in fully synchronization. This architecture, defined as solar DCcoupling, ensures an optimum management of the battery....

All PV inverter technologies Inverter/chargers of the Xtender series are compatible with most brands of grid-tied PV inverters. So you can implement your preferred grid-tied inverter brand in your system for AC coupling applications.

100% autonomous Zero-emission building, independent from the grid, your Xtender system enables you to reach your targets. Reduction of energy consumption of buildings is an important step in the move towards a sustainable economy. How can buildings be made net zero energy, in different climates? Zero energy buildings drastically reduce that energy use by slashing the demand for energy, while supplying the remaining energy needs from renewable energy sources, such as solar panels. An integrated approach, which takes into account both passive measures (such as thermal insulation and sun shading)...

Communication & control Harmonized components ease control and system design Xcom-LAN Xcom-GSM Internet control and communication Local monitoring and control with the RCC-02/03 and remote monitoring and control with the Xcom-LAN or Xcom-GSM. Always in control of the system In addition, total control of the system is also possible via internet on our secured server. The connection with the internet is carried out either by the Xcom-LAN, provided the site has internet access via a local network; or by Xcom-GSM, if there the site has access to the mobile phone network. Our server will provide secure...

Call our specialists +41 27 205 60 80 or visit studer-innotec.com. Studer Innotec SA, rue des Casernes 57, 1950 Sion, Switzerland, [email protected], fax +41 27 205 60 88. April 2019 ® Studer Innotec SA - V1.0